1968-73 Comet Falcon Ranchero Torino 1970-73 Mustang; Disc Brake Spindles; Large

Description: Reproduction OE-style large bearing heavy duty disc brake spindles for 1970-73 Ford Mustang. They are manufactured with modern steel alloys for improved durability and strength over the original spindles. These high quality Mustang spindles are powder coated for a long lasting cosmetic appearance and protection from the elements. These new spindles share Fords original geometry designed to be coupled with 1970-73 OE-style disc brakes or aftermarket brakes. Sold as a pairThese spindles can also be used on earlier model 1965-69 Mustangs and with most compact and intermediate sized 1960s and 1970s Ford/Mercury vehicles due to common upper and lower ball joint tapers and spindle height Our eBay Store About Us Contact Us 1968-73 Comet Falcon Ranchero Torino 1970-73 Mustang; Disc Brake Spindles; Large Bearing Style; OE for 1970-73 Models Product Details Reproduction OE-style large bearing heavy duty disc brake spindles for 1970-73 Ford Mustang. They are manufactured with modern steel alloys for improved durability and strength over the original spindles. These high quality Mustang spindles are powder coated for a long lasting cosmetic appearance and protection from the elements. These new spindles share Fords original geometry designed to be coupled with 1970-73 OE-style disc brakes or aftermarket brakes. Sold as a pairThese spindles can also be used on earlier model 1965-69 Mustangs and with most compact and intermediate sized 1960s and 1970s Ford/Mercury vehicles due to common upper and lower ball joint tapers and spindle height. However the larger spindle pin and outer tie rod taper redesigned axle flange and caliper mounts require brake system upgrades for earlier vehicles. OEM disc brakes from 1968-73 with upright-to-steering arm caliper bracket can be used. Granada-style spindle modification required. OEM hubs from 1968-69 must change to 1970-73 wheel bearings with larger 1.377 and .865 bore sizes. The use of 1970-73 Mustang or 1975-80 Granada outer tie-rods or a bumpsteer kit is required.These spindles are popular for use on 1965-73 classic Mustangs and other classic Fords and are considered an excellent upgrade from the smaller disc brake spindles found on the 1965-69 Mustangs. Perfect for those that want to run bigger tires and larger brakes for performance driving.Note: Installation on 1965-70 Mustang models and other 1970s era Ford/Mercury vehicles requires the 1970-73 outer tie rods sold separately. 1960-66 six- cylinder models with tie-rod adjusting sleeves measuring .500 OD (1/2-20) must upgrade to V8 style steering system or a late style rack and pinion steering system.Installation Requirement:Wheel Bearings: 1970-73 Mustang - Large Inner Bearing: 1.377 bore Small Outer Bearing: .865 boreBall Joints: Factory or aftermarket interchangeable upper and lower ball joints. Direct bolt-on for all applications listed.Outer Tie-Rods:1970-1973 Mustang outer tie-rod # 3A130FAftermarket Brake Options: Wilwood: 13 Performance or 11-3/4 StreetOEM Disc Brake Options: 1968-73 Cougar 1968-71 Comet 1968-70 Fairlane 1968-70 Falcon 1968-71 Montego 1968-73 Mustang 1971 Torino (*NOTE: must change 1968-69 hubs to 1970-73 wheel bearings) Classic Industries® is a registered trademark. All content on this website is copyrighted. No part of this website, including text, photos, or illustrations may be copied without the prior written permission of Classic Industries®. All Rights Reserved. Copyright © 1994-2024 Classic Industries®

Price: 199.99 USD

Location: Huntington Beach, California

End Time: 2024-11-09T09:20:46.000Z

Shipping Cost: N/A USD