Adafruit Airlift Wifi/WLAN Featherwing, ESP32 Koprozessor for Feather Boards,

Description: Adafruit Airlift Wifi/WLAN Featherwing, ESP32 Koprozessor for Feather Boards,The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit AirLift FeatherWing with ESP32 WLAN co-processorAdd WiFi connectivity to your existing Feather project using the Adafruit AirLift FeatherWing. It has a powerful ESP32 processor with an integrated WLAN interface and the latest TLS / SSL encryption. You can continue to use your popular Feather Board, for example based on an ATmega328, and equip it with a WiFi interface using this shield. The wing can be easily connected to the Adafruit Feather M4 use.The WLAN communication is completely taken over by the ESP32 chipset, so that the actual program code remains clear and the existing project is largely relieved. The communication between the microcontroller and the AirLift takes place via a fast 8 MHz SPI connection. The board can be operated with 3V and 5V through the existing level conversion. All that is required for control is an SPI interface and two additional pins. The current consumption is a maximum of 250 mA.The AirLift is supplied with pin headers that you can solder on if necessary. The ESP32 chip has a variant of the Arduino WiFiNINA, which can be used ideally with CircuitPython as well as with the Arduino IDE. Please note that connections to Enterprise WiFi Access Points are not yet supported.For more information, please visit the Adafruit website: https://learn.adafruit.com/adafruit-airlift-featherwing-esp32-wifi-co-processor-featherwing/ Add WiFi connectivity to your existing Feather project using the Adafruit AirLift FeatherWing. It has a powerful ESP32 processor with an integrated WLAN interface and the latest TLS / SSL encryption. You can continue to use your popular Feather Board, for example based on an ATmega328, and equip it with a WiFi interface using this shield. The wing can be easily connected to the Adafruit Feather M4 use. The WLAN communication is completely taken over by the ESP32 chipset, so that the actual program code remains clear and the existing project is largely relieved. The communication between the microcontroller and the AirLift takes place via a fast 8 MHz SPI connection. The board can be operated with 3V and 5V through the existing level conversion. All that is required for control is an SPI in Marke Adafruit EAN Nicht zutreffend Modell Adafruit AirLift FeatherWing – ESP32 WiFi Herstellernummer 4264 Herstellungsland und -region Vereinigte Staaten Produktart FeatherWing

Price: 26.64 USD

Location: Berlin

End Time: 2024-09-26T21:46:20.000Z

Shipping Cost: 7.5 USD