Description: Adafruit ESP32-S3 Feather, 4MB Flash, 2MB Psram , 240MHz, WLAN / Wifi, Ble, QTThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit ESP32-S3 Feather, 4MB Flash , 2MB PSRAM, STEMMA QT, 5477The Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic is here - a feather board with Espressif's powerful new chip! With two 240MHz cores, WiFi and BLE support, and native USB, this board is ideal for powering your IoT projects.Native USB means it can behave like a keyboard or hard drive and no external USB converter is required. WiFi and BLE mean it's great for IoT projects. And Feather means that expandability is ensured with FeatherWings' large community.The ESP32-S3 is a highly integrated, low-power 2.4GHz Wi-Fi/BLE system-on-chip (SoC) solution that supports native USB as well as some other exciting new technologies such as time-of-flight distance measurements and AI acceleration. With its high performance and RF performance, this SoC is ideal for a variety of application scenarios in the Internet of Things (IoT), wearable electronics and smart homes.The Feather ESP32-S3 has a dual-core 240 MHz chip, making it comparable to the dual-core of the ESP32. However, there is no support for Bluetooth Classic, only for Bluetooth LE. This chip is a big step forward from the previous ESP32-S2! This ESP32-S3 mini module we use on the Feather comes with 4MB Flash and 2MB PSRAM, as well as 512KB of SRAM. It can be ideally used with CircuitPython and offers enough memory to buffer larger amounts of data. Use SRAM for fast access and PSRAM if it takes a little longer. It's also great for use in ESP-IDF or with the Arduino IDE.Characteristics:ESP32-S3 Dual-Core 240MHz Tensilica Processor - the next generation of the ESP32-Sx, with native USB, making it like a keyboard/mouse, MIDI device, hard drive, etc. can behave!The mini module has FCC/CE certification and comes with 4 MB Flash and 2 MB PSRAMPowered by USB Type C or Lipoly batteryBuilt-in battery charger when powered via USB-CLiPoly Battery Monitor - MAX17048 chip actively monitors your battery for voltage and state of charge / percentage display via I2CReset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB-serial port so you don't need a separate cable!)Serial debug output pin (optional, for checking the serial hardware debug console)STEMMA QT connector for I2C devices, with switchable power supply so you can go into power saving mode.On/off/charging/user LEDs + status NeoPixel with pin-controlled power supply for low energy consumptionEnergy saving! In deep sleep mode we can reduce the power consumption from the Lipoly connection to ~100µA. The idle current comes from the voltage regulator, the ESP32-S3 chip and the Lipoly monitor. Turn off the NeoPixel and the external I2C power supply for the lowest idle power consumption.Works with ESP-IDF, Arduino or CircuitPython (not recommended as there is no PSRAM, but for some simple IoT projects without large buffers it works) The ESP32-S3 is a highly integrated, low-power 2.4GHz Wi-Fi/BLE system-on-chip (SoC) solution that supports native USB as well as some other exciting new technologies such as time-of-flight distance measurements and AI acceleration. With its high performance and RF performance, this SoC is ideal for a variety of application scenarios in the Internet of Things (IoT), wearable electronics and smart homes. The Feather ESP32-S3 has a dual-core 240 MHz chip, making it comparable to the dual-core of the ESP32. However, there is no support for Bluetooth Classic, only for Bluetooth LE. This chip is a big step forward from the previous ESP32-S2! This ESP32-S3 mini module we use on the Feather comes with 4MB Flash and 2MB PSRAM, as well as 512KB of SRAM. It can be ideally used with CircuitPython and Marke Adafruit EAN Nicht zutreffend Kern ESP32 Serie Feather Modell Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM - STEMMA QT Herstellernummer 5477 Programmspeichertyp Flash Herstellungsland und -region Vereinigte Staaten Produktart Feather
Price: 35.29 USD
Location: Berlin
End Time: 2024-11-11T19:17:03.000Z
Shipping Cost: 7.5 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
MPN: 5477
Brand: Adafruit
Product Type: Feather
Country/Region of Manufacture: United States
Models: Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM - STEMMA QT
Core: ESP32
Program Memory Type: Flash
Series: Feather