Adafruit ESP32-S3 Feather, 8MB Flash, 240MHz, WLAN / Wifi, Ble, Stemma QT, 5323

Description: Adafruit ESP32-S3 Feather, 8MB Flash, 240MHz, WLAN / Wifi, Ble, Stemma QT, 5323The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAMThe Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic is here - a feather board with Espressif's powerful new chip! With two 240MHz cores, WiFi and BLE support, and native USB, this board is ideal for powering your IoT projects.Native USB means it can behave like a keyboard or hard drive and no external USB converter is required. WiFi and BLE mean it's great for IoT projects. And Feather means that expandability is ensured with FeatherWings' large community.The ESP32-S3 is a highly integrated, low-power 2.4GHz Wi-Fi/BLE system-on-chip (SoC) solution that supports native USB as well as some other exciting new technologies such as time-of-flight distance measurements and AI acceleration. With its high performance and RF performance, this SoC is ideal for a variety of application scenarios in the Internet of Things (IoT), wearable electronics and smart homes.The Feather ESP32-S3 has a dual-core 240 MHz chip, making it comparable to the dual-core of the ESP32. However, there is no support for Bluetooth Classic, only for Bluetooth LE. This chip is a big step forward from the previous ESP32-S2! This ESP32-S3 mini module we use on the Feather comes with 8MB Flash and no PSRAM, but it does have 512KB of SRAM. So it can be used with CircuitPython as long as huge buffers are not required. It's also great for use in ESP-IDF or with the Arduino IDE.Characteristics:ESP32-S3 Dual-Core 240MHz Tensilica Processor - the next generation of the ESP32-Sx, with native USB, making it like a keyboard/mouse, MIDI device, hard drive, etc. can behave!The mini module has FCC/CE certification and comes with 8 MB Flash , without PSRAMPowered by USB Type C or Lipoly batteryBuilt-in battery charger when powered via USB-CLiPoly Battery Monitor - MAX17048 chip actively monitors your battery for voltage and state of charge / percentage display via I2CReset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB-serial port so you don't need a separate cable!)Serial debug output pin (optional, for checking the serial hardware debug console)STEMMA QT connector for I2C devices, with switchable power supply so you can go into power saving mode.On/off/charging/user LEDs + status NeoPixel with pin-controlled power supply for low energy consumptionEnergy saving! In deep sleep mode we can reduce the power consumption from the Lipoly connection to ~100µA. The idle current comes from the voltage regulator, the ESP32-S3 chip and the Lipoly monitor. Turn off the NeoPixel and the external I2C power supply for the lowest idle power consumption.Works with ESP-IDF, Arduino or CircuitPython (not recommended as there is no PSRAM, but for some simple IoT projects without large buffers it works) The ESP32-S3 is a highly integrated, low-power 2.4GHz Wi-Fi/BLE system-on-chip (SoC) solution that supports native USB as well as some other exciting new technologies such as time-of-flight distance measurements and AI acceleration. With its high performance and RF performance, this SoC is ideal for a variety of application scenarios in the Internet of Things (IoT), wearable electronics and smart homes. The Feather ESP32-S3 has a dual-core 240 MHz chip, making it comparable to the dual-core of the ESP32. However, there is no support for Bluetooth Classic, only for Bluetooth LE. This chip is a big step forward from the previous ESP32-S2! This ESP32-S3 mini module we use on the Feather comes with 8MB Flash and no PSRAM, but it does have 512KB of SRAM. So it can be used with CircuitPython as Marke Adafruit EAN Nicht zutreffend Kern ESP32 Serie Feather Modell Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No P Herstellernummer 5323 Programmspeichertyp Flash Herstellungsland und -region Vereinigte Staaten Produktart Feather

Price: 34.96 USD

Location: Berlin

End Time: 2024-05-11T18:17:02.000Z

Shipping Cost: 7.5 USD