Adafruit Mini Skinny NeoPixel LED Strip, 144 LEDs/m, Black, for Arduino, 2970

Description: Adafruit Mini Skinny Neopixel LED Strip, 144 LED / M, Black, for Arduino, 2970The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit Mini Skinny NeoPixel LED strip, 144 LED/m, blackThe Adafruit Mini Skinny NeoPixel LED Strip is the particularly thin version of the classic NeoPixel LED strip.This LED strip has 144 digitally addressable RGB LEDs per meter and is only 7.5mm wide when the protective cover is removed. The flexible circuit board is delivered in black.Please note the following points during operation:The LEDs have a maximum power consumption of approx. 40 W per m (approx. 8A at 5V) when all LEDs are on. The power consumption is around 1/3 of the maximum value for most color configurations. A good power supply with, for example, a 5V 2A, 5V 4A or 5V 10A power supply is crucial.The individual LEDs are linked together with a data line (Data In/Data Out). The data protocol is very time-critical due to the individual cable. Ie, a real-time microcontroller is used for the control, such as an AVR, Arduino, PIC, mbed, etc. required and the module is not suitable for Linux-based microcontrollers, for example.In order to be able to control the individual pixels using an Arduino, each LED value is buffered in the main memory. In addition to the allocation for the actual program routine, the RAM of the Arduino UNO is usually sufficient for around 500 NeoPixels. If you want to control the entire bar and use additional program libraries, please use a board with more RAM, such as an Arduino Mega.The strips are designed to operate at 5V. Voltages higher than 6V will destroy the LEDs.Each of the 144 RGB LEDs can be controlled individually. Each color value can be adjusted with 8-bit PWM precision, resulting in a 24-bit color spectrum per pixel. The strip is made from flexible circuit board material and comes with a weatherproof jacket. The strip can be easily shortened; there are markings on the strip every 7 mm with soldering pads so that the strips can be soldered together again and extended. The strips are delivered in 1m strips, each with a 2 or 3-pin JST-SM connector at both ends.Adafruit offers the NeoPixel library for Arduino for control: https://github.com/adafruit/Adafruit_NeoPixelThe library is only suitable for Atmel AVR microcontrollers with a clock speed of 8 MHz and higher. In order to be able to control the individual pixels using an Arduino, each LED value is buffered in the main memory. In addition to the allocation for the actual program routine, the RAM of the Arduino UNO is usually sufficient for around 500 NeoPixels. If you want to control the entire bar and use additional program libraries, please use a board with more RAM, such as an Arduino Mega. Each of the 144 RGB LEDs can be controlled individually. Each color value can be adjusted with 8-bit PWM precision, resulting in a 24-bit color spectrum per pixel. The strip is made from flexible circuit board material and comes with a weatherproof jacket. The strip can be easily shortened; there are markings on the strip every 7 mm with soldering pads so that the strips can be soldered together again and e Herstellernummer 2970 Marke Adafruit EAN Nicht zutreffend Produktart NeoPixel Modell Mini Skinny NeoPixel Digital RGB LED Strip 144 LED

Price: 96.22 USD

Location: Berlin

End Time: 2025-02-02T12:18:31.000Z

Shipping Cost: 7.28 USD