Adafruit Prop-Maker FeatherWing, RGB / Neopixel Driver, for Feather Boards, 3988

Description: Adafruit Prop-Maker FeatherWing, RGB / Neopixel Driver, for Feather Boards, 3988The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit Prop-Maker FeatherWingThe Prop-Maker FeatherWing from Adafruit is ideal for making props such as (light) swords, toys or cosplay elements. The wing is suitable for a variety of feather boards and has the following product features:NeoPixel Port with 3-pin JST connector - ideal for the NeoPixel RGB LED strip with JST connector. The port supplies the current automatically from the USB port or a connected LiPo battery, depending on which source supplies the higher current. A level converter ensures a stable 5V data signal regardless of the feather board used.3W RGB LED driver - 3 MOSFETs enable the connection and operation of a 3W RGB LED. Most feathers have PWM outputs on the corresponding pins, so that the color and brightness can be adjusted to your liking.Integrated 3-axis acceleration sensor - the on-board LIS3DH accelerometer enables the detection of movements, inclinations and taps. The chip is supported by both Arduino and CircuitPython. Class D audio amplifier - drive an 8Ω 1W or 4Ω 3W loudspeaker for sound effects. The function can not only be used with feather boards that have an analog audio output, such as the Feather M0 Express or Feather M4 Express.Power Pin - Use the pin to disconnect the LED, NeoPixel bar and the loudspeaker from the power and thus reduce the power consumption of the FeatherWing to a minimum of less than 1 mA.Please note that some elements on this extension are operated using PWM and an analog output. Feather M0 Express and Feather M4 boards are best for this. If you want to use a different feather board, please pay attention to the following details:Feather 32u4 and 328p do not have PWM outputs for all RGB LED pins and also no analog audio outputFeather nRF52, ESP32 and ESP8266 have PWM outputs on Allen RGB LED pins, but no analog audio outputFeather M0 Basic Boards support the audio function only in Arduino, but not in CircuitPythonThe functions not mentioned here can be used with Allen Feather Boards. NeoPixel Port with 3-pin JST connector - ideal for the NeoPixel RGB LED strip with JST connector. The port supplies the current automatically from the USB port or a connected LiPo battery, depending on which source supplies the higher current. A level converter ensures a stable 5V data signal regardless of the feather board used. Class D audio amplifier - drive an 8Ω 1W or 4Ω 3W loudspeaker for sound effects. The function can not only be used with feather boards that have an analog audio output, such as the Feather M0 Express or Feather M4 Express. Please note that some elements on this extension are operated using PWM and an analog output. Feather M0 Express and Feather M4 boards are best for this. If you want to use a different feather board, please pay attention to the following details Marke Adafruit EAN Nicht zutreffend Modell Adafruit Prop-Maker FeatherWing Herstellernummer 3988 Herstellungsland und -region Vereinigte Staaten Produktart FeatherWing

Price: 20.58 USD

Location: Berlin

End Time: 2024-03-05T22:10:21.000Z

Shipping Cost: 7.52 USD