AMPLIFIER 240V Klipsch 2.1 ProMedia Subwoofer Speaker 2nd Gen Replacement Amp

Description: This listing is for a replacement Promedia 2.1 THX computer speaker amplifier for a Klipsch 2.1 220volt to 240 Volt system (voltages that typically are used outside North America). This amplifier works great, has a pair of upgraded components, a new terminal block for the satellite speaker connections, new mounting gasket, and comes with a 90-day warranty. This unit is intended to replace a non-working amplifier. Not every problem with the popular ProMedia 2.1 system is due to an amplifier problem. Some systems break from damage to the control pod cable; often noticeable by the system working intermittently as the cable is flexed near its plug, or if you can see one of the pins in the plug is bent over. Others have a failing 6.5" speaker. You can remove the metal grill, and touch the foam surround. If it is brittle or sticky or even has holes and tears in it, you know it is time to replace it. I have new replacement 6.5" 6 ohm subwoofer speakers. Avoid a mismatched 8 ohm or 4 ohm generic replacement. 4 ohm replacements can damage the amplifier. 8 ohm replacements reduce performance by 25%. This listing is for the second generation (2012-2018) version amplifier, which does not have a power switch on the panel, nor Bluetooth). This version is interchangeable with the first generation (produced from 2000-2018) which does have a rocker switch for power), since they use the same control pod (with a mini-DIN round 6-pin plug), are each 200 mm x 200 mm to fit the same enclosure, and connect to the same satellite speakers. (A control pod, needed for operation, is not included here). The earlier version uses a heavier, more expensive transformer power supply and has a bit better performance, but is more expensive to refurbish. (I also have refurbished first generation ProMedia 2.1 amplifiers in my store). That version has a power switch, so it draws 0 watts when turned off, but 18-20 watts when turned on (no volume), or 24 VA. Those panels weigh nearly 8 pounds, and have sections which get hot and char over time. This version weighs under 3 pounds and draws 10 watts when plugged in. (It stays on 24/7). The upgrade: I upgraded two 1/4 watt components to 1 watt versions, mounted above the panel to stay cool. I've seen the original resistors burn up. The amplifier runs great and is backed with a 90-day warranty. This system includes: 1 Klipsch ProMedia 2.1 amplifier panel Removable adapter plug for power cord 90-day warranty. Klipsch's Information (2012 data for new versions): Amplifier: High-efficiency power supply and linear amplifiers designed for uncompressed full power sound Subwoofer Limiter: Protective limiter function protects the driver and amplifier from extremely high volume playback. Satellite Impedance: 4 ohms minimum Thanks for looking!

Price: 74.95 USD

Location: New Prague, Minnesota

End Time: 2024-10-06T23:55:01.000Z

Shipping Cost: N/A USD