Audio Technica AT-OC9XEB Pickup Cartridge MC System

Description: Audio Technica AT-OC9XEB Pickup Cartridge Mc SystemThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Audio Technica AT-OC9XEBDual moving coil stereo pickup with mounted elliptical needle Elliptical, gripped needle with aluminum needle carrierNeodymium magnet and pure iron yoke for higher magnetic energyAluminum housing minimizes unwanted vibrations - for lower resonances and excellent audio reproductionPure Copper by Ohno Continuous Casting (PCOCC): High-purity coil wire for the best possible signal quality Excellent, cost-effective entry into the world of moving coil pickups. The AT-OC9X series is the latest generation of the successful AT-OC9 series from Audio-Technica, the pioneers in the field of phono cartridges.The new pickups are offered with different stylus types: Elliptical/Casted, Elliptical/Naked, Microlinear, Shibata and Special Line Contact. Moving coil pickup with wide frequency response and excellent channel separation (allocation of audio information for the left and right channels) - for a particularly clean stereo image. Pure Copper by Ohno Continuous Casting (PCOCC): High-purity coil wire for the best possible signal quality. Threaded holes in the pickup housing for quick, easy installation on a headshell or integrated tonearm with just two M2.6 screws - no nuts. Models AT-OC9XEB and AT-OC9XEN with aluminum needle carrier. Models AT-OC9XML, AT-OC9XSH and AT-OC9XSL with boron needle carrier. Neodymium magnet and pure iron yoke (models AT-OC9XEB and AT-OC9XEN) for higher magnetic energy. Models AT-OC9XML, AT-OC9XSH and AT-OC9XSL: Magnet system with yoke Permendur, a soft magnetic iron-cobalt alloy. Aluminum housing minimizes unwanted vibrations - for lower resonances and excellent audio reproduction. Technical dataFrequency range 20 - 30,000 HzChannel separation 25dB (1kHz)Vertical scanning angle 20°Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)Shaft shape of the needle round shaftRecommended load impedance > 100ΩCoil impedance 12Ω (1kHz)DC resistance 12ΩCoil inductance 25µH (1kHz)Output power 0.32mV (1kHz at 5cm/sec.)Channel balance at output 1.5dB (1kHz)Needle cut ellipticalHollow aluminum needle carrierStatic needle compliance 20×10-6cm/dyneDynamic needle compliance 9×10-6cm/dyne (100Hz)Fastening half inchDimensions H17.3 × W16.8 × D25.7mmIncluded accessories 1 non-magnetic screwdriver1 brush2 washers4 pairs of mounting screws (M2.6): 5mm, 8mm, 10mm, 12mm1 protective cap (plastic)Material d. Housing aluminumNeedle curvature radius 0.3 x 0.7 milBrass connection pinsDual moving coil typecoil wire Pure Copper by Ohno Continuous Casting (PCOCC): High-purity coil wire for the best possible signal qualityWeight 7.6gThe AT-OC9X series is the latest generation of the successful AT-OC9 series from Audio-Technica, the pioneers in the field of phono cartridges. The new pickups are offered with different stylus types: Elliptical/Casted, Elliptical/Naked, Microlinear, Shibata and Special Line Contact. Moving coil pickup with wide frequency response and excellent channel separation (allocation of audio information for the left and right channels) - for a particularly clean stereo image. Pure Copper by Ohno Continuous Casting (PCOCC): High-purity coil wire for the best possible signal quality. Threaded holes in the pickup housing for quick, easy installation on a headshell or integrated tonearm with just two M2.6 screws - no nuts. coil wire Pure Copper by Ohno Continuous Casting (PCOCC): High-purity coil wi Marke Audio Technica EAN Nicht zutreffend Markenkompatibilität Universell Herstellernummer nicht zutreffend Tonabnehmer-Art Elektromagnetischer Wandler (MM) Produktart Cartridge

Price: 323.84 USD

Location: Sasbach

End Time: 2024-12-20T00:06:27.000Z

Shipping Cost: 42.1 USD