Description: Baja Designs® OnX6+ LED Bar, LP4 Spot Pair, Amber Covers for Can-Am Maverick X3 Baja Designs® OnX6+ LED Bar, LP4 Spot Pair, Amber Covers for Can-Am Maverick X3 Add some lighting might to your Can-Am Maverick X3 UTV ATV with Baja Designs OnX6+ Led Light Bar Front Shock Mount Kit. Our kit includes the 10-inch OnX6+ light bar (in driving/combo pattern), an on/off rocker switch harness, front shock mount bracket, and an amber rock guard lens cover. The amber rock guard serves two useful purposes: it protects the OnX6 from dirt and debris, and also allows you to quickly change your beam color from white to amber in seconds! Just snap the cover onto the bar and go! Also includes pair of LP4 lights in Clear Spot Pattern with Amber Covers, and universal surface mount brackets. PLEASE NOTE: There are no Can-Am specific brackets included for the LP4. Please confirm you have everything you need to mount the LP4 to the desired location on your Can-Am. Included: (1) 10-inch OnX6 +Driving/Combo Light Bar w/Clear Lens (1) ransparent Amber Rock Guard Cover | Protect your lens & transform beam color to amber (1) Shock Mount Bracket (1) OnX6 Rocker Switch Harness (2) LP4 LED Light (1) On/Off Wiring Harness (supports 2 LP4 lights) (1) Backlit Add-On Wiring (for powering amber backlight) (2) Amber Rock Guard Lens Covers Separate yourself from the pack with the Baja Designs Can-Am OnX6 Shock Mount. This kit includes a 10 OnX6 light bar and mount that easily bolts up to the factory shock tower and keeps the light stable at high speeds. This kit is ideal for someone looking to gain forward projecting light while maintaining the X3s aggressive styling. Baja Designs Features: Limited Lifetime Warranty – Complete Purchase Protection uService® – Replaceable Lenses And Optics ClearView® – All The Light, Right Where You Need It. MoistureBlock™ – Waterproof, Rain Proof, Submersible CopperDrive® – Only LED Driven At 100% 5000K Daylight – Less Driver Fatigue, Natural Color Specifications for OnX6 Light Bar: Lumens: (High) 12,460 (Low) 9,230 Utilizing 6 LEDs Wattage/Amps: (High) 108W / 8.4A (Low) 80W / 5.7A Dimensions: 10 x 4.29 x 2.69 Weight: 4.25 lbs LED Life Expectancy: 49,930 Hours Front Lens: Hard Coated Polycarbonate Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize Bezel: Billet Machined Aluminum Hardware & Bracket Material: Stainless Steel Exceeds MIL-STD810G (Mil-Spec Testing) Built-In Overvoltage Protection IP69K (Waterproof up to 9ft & Pressure Washable) IK10 Compliant (Mechanical Impact Testing) Specifications for LP4 Lights (per light): Forward Projecting Lumens: 7,050 Utilizing 4 LEDs Forward Projecting Wattage/Amps: 60W / 6.5A IPT Lumens: 1,700 Utilizing 4 LEDs IPT Wattage/Amps: 15W / 1.0A Backlight Wattage/Amps: 4.83W / 0.35A Dimensions: 5.1″ Height / 5.1″ Width / 3.2″ Depth Weight: 2.8lbs Mating Connector: DT06-4S Deutsch LED Life Expectancy: 49,930 Hours Front Lens: Hardcoated Polycarbonate Housing: Hard Anodized Machined Aluminum Bezel: Billet Machined Aluminum Hardware Bracket Material: Stainless Steel Exceeds MIL-STD810G (Mil-Spec Testing) Built-In Overvoltage Protection IP69K (Waterproof up to 9ft Pressure Washable) IK10 Compliant (Mechanical Impact Testing) Lighting Pattern: High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 5) Please Note: The main included harness has two DT06-4S Deustsch Connectors (1 connector for each light) and controls the main beam on each LP4 via an On/Off switch. LP4 lights only have a high beam mode (NO low beam), and the harness has a two way switch; one position is OFF, the other is ON (high beam mode). The included “Backlit Add-On” wiring kit (bottom right of main product image) includes fuse taps, along with long length wiring which has bullet connectors on each end; this separate “Backlit Add-On” kit is used to power the amber backlight feature separately, and the bullet connectors on the long pieces of wiring are meant to be connected to the bottom left pin on each Deustsch Connector plug (located on the back of each LP4). You can use the included fuse taps to make the amber backlights dependent on a specific vehicle fuse, or you can simply connect the wire to a separate auxiliary switch for manual control of the back-lights. The LP4 is the smallest variant in the LP line up but maintains all of the power and features of its siblings. The LP4 features a total of 8,750 lumens and a 200° spread of useable LED light. This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks – drastically improving cooling capacity and performance. With an amber day-time running light, the LP4 will fulfill all your lighting needs. Shipping Shipping:We ship with FedEx, UPS, & USPS services. For Ground, 2-Day, 3-Day, and Overnight services, we may choose between FedEx & UPS depending on which carrier is more efficient for your specific order. Delivery time:Refer to the delivery estimate shown at the top of this page (desktop version). If you're using the mobile app, an estimated delivery date will be displayed under the product price. Payment We accept the following payment methods: Debit & Credit cards from Visa, Mastercard, Discover, American Express PayPal Google Pay & Apple Pay Please contact us if you have any questions. Customer Service We're here to answer questions 24/7. If you're on the mobile app, scroll down on the main listing to the "About the Seller" section, and click "Show More"; then, select "Ask Seller a Question" to send us a direct message. If you're using a desktop browser, click the "contact seller" link on the top right of the page, underneath "Seller Information". If you wish to reach us by phone, click "Contact Seller" and then under "select a topic", click "other" and you will be given our customer service phone number.
Price: 1507.75 USD
Location: Salt Lake City, Utah
End Time: 2024-12-16T20:18:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Baja Designs
Manufacturer Part Number: 447089AR-297801A