CD-210V - 8 X 16 Mini Metal Lathe 1.0 HP Servo Motor 750 Watt Upgrade Kit

Description: 750 watt 8 X 16 Metal Lathe CD-210V Servo Motor upgrade Kit Built for the 8 X 16 Mini Metal Lathe seen in the videos and images. Important Notes: There are 3 versions of belts-drive pulleys. This listing is for the 4 rib P type belts. They have 4 ribs/groves across the contact surface. For 4 V like this VVVV We do have other versions. Bolts right in: Easy to install in original motor position. Bolt pattern is the same. Fits: See images and ask questions. This is a prototype now installed and confirmed by 6 customers. Now installed and tested by us. Sold complete with all the adapters required to install in the original motor location of the 8 X 16. As seen in the above images. Each one is custom built when you order: When the build is complete, it will be tested for 20 minuets. Any defects found during testing will require a complete new build. This insures you likely will not have to deal with returns and exchanges due to manufacturer defects. All parts required to build are In stock. That means if it is listed as available, it is because we have enough parts to build at least two. We also stock extra parts in case of warranty. The horsepower improvement is incredible. This system provides full power at any speed Motor and spindle speeds + Reverse: See video. Note the short video is made in low range. High range increases top speed. Sold with a 2024 year model reverse on the fly version control unit:Speed is programmable for any range between 200 to 4,500 RPM Settings are limited to 10 RPM intervals.Reverse on the fly employs adjustable brake and soft start for a near instant and smooth change of directionE Stop employs adjustable brake. This allows for coast to stop or immediate stop.Power went out safety circuit. Does not allow restart if the power comes back on while you are away.Adjustable brake.Adjustable soft start.Thermal overload protection.Software based jam protection. Motor Specifications:Watt: 750 (1.0 HP)Voltage: 110V~ 140V single phase AC.HZ: 50 ~ 60Torque: 10 N.M.RPM: 200 to 4.500 RPM in 10 RPM increments. IN THE BOX A new 750 watt motor like the one seen here in photos. Motor Will come with the face drilled and threaded to fit a CD-210V. Fitting this motor may require filing or drilling one of the existing motor mount holes in your lathe to compensate for minor fit adjustment. The new motor will come with the drive pulley installed on it using a 5mm key-way and set screws. This allows for belt alignment adjustment. A new 2024 control computer with internal speed control.A wire harness that will allow you to power up your existing digital tach from our control unit is installed.Mounting hardware includes 4 button head M6 bolts.Control computer (driver) comes pre-programmed. You may need to adjust brake and soft start for optimal performance settings for your lathe.Programming instructions and fault codes are also provided by The Custom Crafter on line. Includes recommended settings.Assembly requires some technical skill to include minor machine work. Ask questions before you buy it Limited 90 day parts warranty. Labor is buyers responsibility: See details, what's covered and for how long etc below. Shipping both ways for all parts returned for warranty is the buyers responsibility. Parts returned will be inspected for unique identification mark and or abuse. If found to be abuse or missing the identity mark, no warranty exchange part will be provided and buyer will be required to pay shipping to get their parts back. Warranty exchange parts may or may not be new but instead refurbished or demos that I have from previous builds. Warranty starts on the day our records show the system as paid and not the date the item is actually received. Servo Motor. - I will exchange a defective servo motor for up to 90 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. Computer control unit. - I will exchange a defective control unit PCB for up to 90 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. Improper installation or abusive operation is not warranty. 15 day return policy is not managed through eBay. No reason is required. Buyer pays shipping both ways. Buyer provides tracking number that shows the item is in possession of the return shipping company before the 15 day time period runs out. 15 day time period starts when tracking shows original order as in possession of USPS. Buyer to provide tracking # and shipping company name within 36 hours of when issued. Return must be shipped through USPS, UPS or FedEx. All items returned must be in like new and unused condition: This includes original packaging. Missing packaging will result in a restocking charge of up to 20%Installed items will not be refunded or charged up to 50% to restore and resell as a refurbished unit.

Price: 320 USD

Location: Haines City, Florida

End Time: 2024-08-20T13:02:34.000Z

Shipping Cost: 28 USD