CYPRESS PEARL 1/2" x 150' Colored Beaded Wheel Well Molding

Description: ****This trim is in CYPRESS PEARL. If you see another color, and wish to purchase it, message us and we will point you to the correct product.***** · The 30 Series Wheel Well / Decorative Trim is 1/2" wide. · This Molding is primarily used as a Wheel well in vehicles. It comes with a 3M Acrylic Foam Tape for easy, quick installation. Available in a variety of colors Primarily used on Vehicle Fenders but can also be used for Spas and Hot Tubs, Walls, Furniture, and any other Unfinished Edges This Wheel Well/ Decorative Trim is a half round shape with a bead. Installation Instructions Do not stretch molding while installing. 1. Temperature of installation surface area and moldings must be at least 20°C (70°F). 2. Always cut moldings from the chrome side downward. 3. To cut, use anvil type shears 4. Clean area thoroughly with a non-oily general purpose wax and grease remover - 3M general purpose cleaner followed by isopropyl alcohol is preferred. 5. Do not touch or contaminate adhesive once liner is removed. 6. Apply moldings on a flat surface only - not on a ridge. Application: 1. Apply a masking tape guide line to the area molding will be applied. Do not apply masking to a freshly painted surface. 2. Clean area above masking tape guide using a general purpose cleaner followed by isopropyl alcohol. Use a clean lint free cloth. 3. Remove 8"-10" of adhesive protective liner at a time and apply molding using a rolling motion. Check molding clearance with all doors by opening each carefully. Once the molding is fixed to the car it should not be removed. 4. Using firm pressure (20-30lbs) rub molding in place with a molding roller (preferred) or a cloth to pressurize adhesive and ensure a maximum bond. Press hard with a blunt object on all ends to ensure permanent adhesion.

Price: 116.48 USD

Location: Glen Allen, Virginia

End Time: 2025-01-21T17:33:31.000Z

Shipping Cost: 0 USD