For Ford Replacement Alarm Remote Keyless Entry Control Key Fob Clicker 4 Button

Description: Self-Programmable Remote Car Key Replacement An inexpensive replacement for your remote key fob, the car key replacement is self-programmable and comes with easy do-it-yourself instructions to help you program your new car key at home. Enjoy keyless entry on a wide variety of vehicles from Ford, Lincoln, and Mercury. Each fob key has been pre-tested to ensure fitment and that signals are transmitting properly. Every remote key fob comes complete with batteries and free tech support to help get your new smart key working. Sepcification:•For Replacment Part Numbers: 2L2T-15K601-BA, 2L3T-15K601-AA, 8S4Z-15K601-AA, 2S4T-15K601-AB, 8S4T-15K601-AA, F8DB-15K601-BA, F87B-15K601-BA, 2S4T-15K601-AA, 2L2Z-15K601-BA, 1L2T-15K601-AA, 5925872 •FCC ID: CWTWB1U331, CWTWB1U345, CWTWB1U322, GQ43VT11T •Frequency: 315 MHz •Battery: CR2032 Compatible with:This car remote works as a replacement for part numbers, 2L2T-15K601-BA, 2L3T-15K601-AA, 8S4Z-15K601-AA, 2S4T-15K601-AB, 8S4T-15K601-AA, F8DB-15K601-BA, F87B-15K601-BA, 2S4T-15K601-AA, 2L2Z-15K601-BA, 1L2T-15K601-AA, 5925872 and FCC ID: CWTWB1U331, CWTWB1U345, CWTWB1U322, GQ43VT11T Application and fitment:FIT FOR FORD CROWN VICTORIA 2007 - 2010 FIT FOR FORD ESCAPE 2001 - 2012 FIT FOR FORD ESCORT 1998 - 2003 FIT FOR FORD EXPEDITION 1998 - 2012 FIT FOR FORD EXPLORER 1998 - 2012 FIT FOR FORD EXPLORER SPORT TRAC 2001 - 2010 FIT FOR FORD FIVE HUNDRED 2005 - 2007 FIT FOR FORD FOCUS 2000 - 2012 FIT FOR FORD FUSION 2006 - 2012 FIT FOR FORD MUSTANG 1999 - 2014 FIT FOR FORD TAURUS 1998 - 2012 FIT FOR FORD THUNDERBIRD 2002 - 2005 FIT FOR LINCOLN AVIATOR 2003 - 2005 FIT FOR LINCOLN NAVIGATOR 2001 - 2012 FIT FOR LINCOLN TOWN CAR 1998 - 2009 FIT FOR MERCURY COUGAR 1999 - 2002 FIT FOR MERCURY GRAND MARQUIS 2006 - 2011 FIT FOR MERCURY MARINER 2005 - 2011 FIT FOR MERCURY MONTEGO 2005 - 2007 FIT FOR MERCURY SABLE 1999 - 2005 FIT FOR MERCURY TRACER 1999 Package Includes: 2Pack Keyless Remote Fob（4Buttons）Including with Battery and Electronics How to Program your Keyless2Go Key Fob Replacement:Option 1: 1.Close all doors, then open driver’s door and press the Unlock button on driver’s door while it is open and insert key into the ignition. 2.Turn ignition from OFF to RUN 8 times within 8 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (if the door locks do not cycle, then it was done incorrectly. You must start over by removing key and beginning from step 1) (Off is the position where you can remove your key, RUN is the position just shy of starting your car.) 3. Within 10 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 5. 4. Within 10 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4 for all other remotes. 5. Turn ignition to OFF. Locks will again cycle to indicate the end of programming mode. *If this does not work try the procedure with the door closed. Option B: 1. Fasten seatbelt and close all doors 2. Turn the ignition from OFF to RUN 4 times within 3 seconds. 3. Turn the ignition OFF. The system will chime to confirm programming mode. 4. Within 10 seconds, press and hold any button on the first keyless remote. The system will chime once to confirm programming. 5. Within 10 seconds, press and hold any button on the second keyless remote. The system will chime once to confirm programming. 6. Turn ignition to RUN to exit programming mode. Please note: All steps should be performed in rapid succession. If you do not hear the initial chime or door lock cycle, this means the vehicle never entered programming mode. You should remove the key from ignition, open and close the door and start over.

Price: 8.98 USD

Location: Hebron, Kentucky

End Time: 2024-11-24T03:44:25.000Z

Shipping Cost: 0.99 USD