Front Disc Brake Conversion for 65-73 Ford Mustang using 94-04 Cobra 13" Brakes

Description: 65-73 Mustang, Cougar, Fairlane, Comet, Maverick, Falcon, Torino, Ranchero + More THIS AUCTION IS FOR ONE COMPLETE FRONT SET of BRACKETS, BOLTS AND CENTERING RINGS ONLY Customer to provide their own Front calipers and rotors from 1994 to 2004 COBRA (Brakes from NON-COBRA will not work) DUAL PISTON CALIPERS 13.0" DISC BRAKE CONVERSION This item includes BRACKETS - MustangSteve Design, Laser cut steelBOLT KIT - Specific grip length high quality Grade 8 fastenersROTOR CENTERING RINGS - Steel rings press onto the drum hub INSTRUCTIONS - Detailed instructions for easy installation Everything you need to put 2005-2014 Mustang GT Disc brakes on your drum spindles is included. (Calipers, rotors not included) (You will need to fab some hard lines to connect the hoses to your existing brake hydraulic system) Fits Original V8 Drum Brake Spindles and Hubs!!! This is for those running larger wheels on their Mustang. Don't spend alot of money to upgrade your drums to the 11" diameter factory stock discs when you can install these for about the same money and have HUGE STOPPING POWER !!! The difference in stopping power and fade resistance between these brakes and original Mustang 11" factory disc brakes, or even the popular Granada disc brake swap conversion is phenomenal !!! COBRA 13" brakes are lightest factory option available and have great stopping power, plus they LOOK GREAT ! This retrofit kit, as with other MustangSteve products, uses easily replaceable and obtainable FORD parts for anything that could ever wear out. A BIG PLUS if you ever need a brake part in a hurry! Utilizes your original 65-73 drum brake spindle and hub (discard the drum and use the old hub).You DO NOT have to remove the original spindle from the car.You DO NOT have to have the front end realigned after installation.TRACK WIDTH REMAINS AS STOCK.Requires 16" or 17" wheels, 17" preferred. Wheel must be able to clear the larger calipers. Any wheels that clear stock Cobra/MACH I/BULLITT brake setup will fit as these duplicate the dimensions exactly of a 94-04 Cobra. Don't want late model Ford factory wheels? This design lets you have the BIG BRAKES and run many different aftermarket wheels, if they have the correct backspacing and will clear the caliper. NO WHEEL SPACER REQUIRED, at all! Of course, the late model 17x8 Mustang wheels will fit as well using a billet aluminum 1" spacer. (The deeper offset of the 94-04 Mustang wheel requires the spacer, NOT the brake setup) Normal fitment is 17x8 with 4.5" to 4.75" backspacing. BEST fitment is 17x7 with 4.5" backspacing. Refer to Mustang Monthly Magazine's article on my 66 fastback with these COBRA brakes and 17x7 narrowed Bullitt wheels.Positioning the large rotor and caliper as far inboard as possible drastically reduces the effect of the rotor's unsprung weight and reduces gyroscopic effect on initial cornering effort. PURCHASER IS RESPONSIBLE FOR DETERMINING WHEEL FITMENT FOR YOUR VEHICLE!!!!!!!!!! American Racing Torque Thrust II wheels will NOT clear the calipers unless a 1/4" spacer and longer studs are used. Torque Thrust M wheels do clear. I am not aware of any other 17" wheels that do not fit, but I do not have access to every wheel out there, so check clearance before you purchase wheels. See my other items in my eBay store for matching REAR COBRA DISC BRAKE brackets You just can't BEAT factory FORD parts for performance, durability, and availability! TECH ADVICE AVAILABLE through the eBay messaging system or through the FYIFORD internet forum that I manage.

Price: 305 USD

Location: Cleburne, Texas

End Time: 2024-09-13T18:16:25.000Z

Shipping Cost: 0 USD