Headlight Restoration Kit Polish And Sealant. Meguiars G2980 Heavy Duty. New.

Description: Meguiars G2980 Heavy Duty Headlight Lamp Restoration Kit With Polish And Sealant. For best rests, apply to adean, cool Sdryheadightintheshade.Me Not intended for use on LCD, navigation screens, plastic conrertWe top windows or motorcycle windscreenRemove any drt, dust or debris from headtoght using glass cleaner and a dean towel Mask edges using masking tap. Be cautious around edges, and be careful to not touch paint1. Remove any dirt, dust or debris from headlight using glass cleaner and a dean towel. Mask edges using masking tap. Be cautious around edges, and be careful to not touch paint2. Attach 1000 grit finishing disc to hand pad. Maintain or keep the finishing disc wet by dunking it into a small container with water or spraying water di redly onto the disc Sand the headlight in a smooth uniform side to side motion with overlapping passes. Frequently wet the disc for lubrication. Continue sandmguntilhearSght appears evenly frosted. Wipe the headlight dry with a microfiber towel.3. Remove 1000 grit finishing disc and attach the 3000 grit finishing disc to the hand pad. Maintain or keep the finishing disc wet by dunking it into a small container with water or spraying water directly onto the disc. Sand the headlight thoroughly in smooth uniform up and down motion with overlapping passes. Wipe the headlight dry with a microfiber towel.4. Attach the Meguiar’s" yellow polishing pad to drill (Refer to drill mfg’s directions for proper attaching instructions. Recomended for use with corded drills that opperate between 1200 & 2500 RPM’s).5. Apply a nickel-sized amount Meguiar’s* PlaaC* polisR to pad. Place pad face flatly on the surface to W restored, then tilt pad to one side (to increase user" control) before activating drill. Use a stow.badc&fote continuous overlapping motion to treat a small area^ at a time. Heavy pad pressure is not required. Do not use the pads edge. Meguiar’s PlastX can be applied at all drill speeds. Faster drill speeds produce more " cutting and polishing action; however, they may also increase the difficulty in keeping the pad flat against ’ the surface, so alter drill speed as needed.6. Remove product immediately before it has a chance to dry with a microfiber towel. Reapply PlastX as necessary and continue buffing until headlight is clear. Apply and remove PlastX with the microfiber' towel by hand for a final buff.7. Spray restored headlights with glass cleaner to remove all product residue and wipe clean and dry with a microfiber towel.8. Ensure the headlight surface is dean and dry. Apply the Sealant to the gray applicator pad. Begin to apply the Sealant from top to bottom evenly. Continue working your way across the headlight with overlapping strokes until the entire headlight has been treated. Repeat process on other headlight. Product dries to the touch in 15 minutes. Product fully cures in 24 hours. It is recommended to keep headlight clean and dry while Headlight Sealant fully cures.

Price: 24.95 USD

Location: Hollywood, Florida

End Time: 2024-11-11T04:22:25.000Z

Shipping Cost: 0 USD