JBL TTM149 SPEAKERS W/ CROWN MACRO-TECH 36x12 & ASHLY PROTEA 3.24 CL PACKAGE

Description: 8 - JBL TTM149 STAGE MONITOR SPEAKERS The TTM149 packs maximum output, state-of-the-art transducer technology into an extremely low profile and compact package. Excellent low-frequency extension and the ability to cut through high on-stage sour pressure levels while delivering clean, articulate vocals are two key design goals met with the TTM149.Symmetrical enclosure design allows use of any TTm149 in "left" or "right" orientation. Mirror imaged pairs with only one type of box in inventory. Optimal 30? baffle angle for stage use.The TTM149 is a biamp only system. Optimum performance is obtained by use of DSP based signal processing. The JBL Professional DSC260, dbx Driverack, Crown IQ-USM 810, USP2 PIP™ card and all BSS processors are supported. As an alternate, Crown amplifiers with analog AMCb PIP™ cards installed can be utilized with excellent results. 6 - CROWN MACRO-TECH 36x12 AMPS Load Impedance: Safe with all types of loads, even reactive ones. Rated for 2 to 16 ohms.Voltage Gain to 8-ohm load at rated output at 1 kHz, maximum level setting:Channel 1 (3600): 124.6:1 ±6% or 41.9 dB ±0.5 dB at 0.775-volt sensitivity; 69.2:1 ±6% or 36.8 dB ±0.5 dB at 1.4-volt sensitivity.Channel 2 (1200): 64:1 ±6% or 36 dB ±0.5 dB at 0.775-volt sensitivity; 35.5:1 ±6% or 31 dB ±0.5 dB at 1.4-volt sensitivity. 20:1 ±6% or 26 dB ±0.5 dB at +26 dB sensitivity.Required AC Mains: All units require 90 watts or less at idle. Current, voltage and frequency requirements are provided on the unit’s back panel.AC Line Connector: NEMA 5-15P.PerformanceFrequency Response: ±0.1 dB from 20 Hz to 20 kHz at 1 watt.Phase Response: ±10 degrees from 10 Hz to 20 kHz at 1 watt.Signal-to-Noise Ratio: 20 Hz to 20 kHz: Better than 105 dB A-weighted or 100 dB unweighted below rated full bandwidth power.Total Harmonic Distortion (THD): At full bandwidth power, less than 0.05% from 20 Hz to 1 kHz increasing linearly to less than 0.1% at 20 kHz.Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) Less than 0.05% from 10 milliwatts to full bandwidth power.Damping Factor: Greater than 1,000 from 10 Hz to 400 Hz.Slew Rate: (Slew rates are limited to useful levels for ultrasonic/RF protection.) Channel 1, greater than 30 volts per microsecond; Channel 2, greater than 13 volts per microsecond. 2 - ASHLY PROTEA 3.24CLProtea System II 3.24CL-d from Ashly is a 3 input, 6 output digital crossover/system processor. In addition to setting crossover frequencies, each output may be assigned to any one or a combination of inputs, which allows the user to program 4 parametric filters, low or high shelf filters, delay for time delay adjustments, output gain, reverse polarity and a compressor/limiter for speaker protection.A powerful tool for use in fixed installation and live sound applications, the unit utilizes state of the art DSP that includes 24-bit, 48kHz delta-sigma A/D converters with 128x over-sampling. D/A conversion utilizes 24-bit delta-sigma converters with 128x over-sampling. All inputs and outputs are precision balanced and RF protected using XLR connectors.The Protea 3.24CL-d is a variant of the 3.24CL with the only difference being the adjustable input and output delay times. Since the unit provides longer delay times on the outputs, distribution of audio to different zones is possible. 3 input/6 output programmable digital processor with crossover, EQ, delay and limiter functions

Price: 6000 USD

Location: Astoria, New York

End Time: 2025-01-02T17:41:53.000Z

Shipping Cost: N/A USD