keyless alarm remote Audiovox Prestige ELVATCB APS2K4MSFLCF control APS510A fob

Description: Stock # 525, 526, 527, 527A, 528, 529 & 529A have interchangeable button pads. Case fronts are interchangeable with stock # 527 Stock Photo See pictures for an example of what you will receive. One (1) Aftermarket Security Installed System remote keyless entry fob alarm beeper keyfab Transmitter control clicker keyfob controller replacement Audiovox / Prestige / Pursuit / Pro FCC ID: ELVATCB Part #: APS2K4MSFLCF Interchangeable Part #s: CA-5BLCD CA-5BLED CA-4B 5BCRCS03 Frequency: 433 - 434 MHz (433.92) LED Light Color: Red Buttons: 5; Lock, Unlock, Trunk Opener/Remote Vehicle Car Engine Starter, Option Frequency: 433 - 434 MHz Battery: 1; GP23A See Item Specifications for more details Compatible with the following Aftermarket installed security systems: APS510A APS610A APS800A APS997 APS875A Programming Instructions: 1) Enter the vehicle, and turn the ignition switch to the on position. 2) Press and release the valet push button switch three times. Note: Some systems may use a combination push-button LED switch. In these systems the push-button and the dash mounted LED are one and the same. 3) The dash mounted LED will flash 1x, and the siren will chirp 1x, indicating that the system is ready to accept programming of channel #1 which is arm/lock, disarm/unlock/unlock 2, and panic functions. 4) Press and hold the lock or lock/unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 4 for each transmitter you wish to program". NOTE: If your transmitter button has the Lock/Unlock icon on one button, press and release the valet push button switch 2 times then move on to step #8. 5) Press and release the valet push button switch one time to advance to channel 2. The siren will chirp 2 times and the dash mounted LED will Flash 2 times, indicating that the unit is ready to accept programming for channel # 2 which is only used for separate lock and unlock button transmitters, and is the disarm/unlock/unlock 2 and panic. 6) Press and hold the unlock symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 6 for each transmitter you wish to program". 7) Press and release the valet push button switch one time to advance to channel 3. The siren will chirp 3 times and the dash mounted LED will Flash 3 times, indicating that the unit is ready to accept programming for channel # 3 which is the trunk release/alternate output channel of the system. 8) Press and hold the trunk/key symbol button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 8 for each transmitter you wish to program". 9) Press and release the valet push button switch one time to advance to channel 4 if so equipped. The siren will chirp 4 times and the dash mounted LED will Flash 4 times, indicating that the unit is ready to accept programming for channel # 4, optional device (where equipped) 10) Press and hold the Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 10 for each transmitter you wish to program". 11) Press and release the valet push button switch one time to advance to channel 5 if so equipped. The siren will chirp 5 times and the dash mounted LED will Flash 5 times, indicating that the unit is ready to accept programming for channel # 5 optional device (where equipped) 12) Press and hold the second Option button of the transmitter you wish to program for 4 seconds or until a long chirp is heard from the siren. "Repeat step 12 for each transmitter you wish to program". How to find out if this remote is compatible with your Vehicles’ installed RKE System If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first. 1. Check the back of your current or old keyless remote to match FCC ID /Part #’s. 2. Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need. Your vehicle will be installed with one of the following keyless entry systems: a. Standard Keyless Remote Packages: Installed at time of manufacture. b. Optional Keyless Remote Packages: Installed by a dealer. c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. d. No remote keyless entry system at all. The above information can change which remote you need for your installed remote keyless system.

Price: 29.99 USD

Location: Wellsboro, Pennsylvania

End Time: 2025-01-13T23:02:38.000Z

Shipping Cost: 6.96 USD