M430/M520 DC4-30V DC100A Current Voltmeter Ammeter Dual LED 4/5-Wire Display New

Description: Store CategoriesStore CategoriesOtherM430/M520 DC4-30V DC100A Current Voltmeter Ammeter Dual LED 4/5-Wire Display New Details M430 4-30V 10A/50/100A 4 Wire50A /100A must be used with a shuntM430 is a voltage, current and power measuring instrument. It can only measure and display the voltage, current and power of the circuit under test. The displayed value can be fine-tuned through an adjustable resistance. It does not have the functions of buck-boost or current limiting. The actual voltage and current of the loop has no effect.Do not use high voltage above 30V when using, otherwise it will cause overvoltage damage to the product.The 10A range product comes with a shunt resistor, and there will be a short circuit at the test end of the direct current measurement. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.50A/100A range products need an external shunt for normal use. After connecting the shunt, there will be a short circuit at the test terminal to directly measure the current. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.According to different current ranges, it is divided into 10A, 50A, 100A. Operating Voltage The working voltage of the instrument is DC 4~30V, and 5~12V is recommended.The thin red wire is the positive pole of the working power supply, and the thin black wire is the negative pole of the working power supply, which belongs to the common ground with the thick black wire;When using, the limit voltage connected to the thin red and black wires cannot exceed 30V, and 12V power supply is recommended Measuring range10A: Voltage measurement range is 0~100V, display mode below 10V is 0.00V, voltage starts at 0.2V, error range is ±1V, current measurement range is 0~10A, current starts at 0.03A, error is ±0.1ADC0.20V~9.99~10.0~100V (±1M)DC0.03A~9.99A (±0.1) 50A: The voltage measurement range is 0~100V, the display mode below 10V is 0.00V, the voltage starts at 0.2V, the error range is ±1V, the current measurement range is 0~50A, the current starts at 0.03A, and the error is ±0.5ADC0.20V~9.99~10.0~10OV (±1V)DC0.03A~9.99~50.0A (±0.5A) 100A: Voltage measurement range is 0~100V, display mode below 10V is 0.00V, voltage starts at 0.20V, error range is ±1V, current measurement range is 0~100A, current starts at 0.03A, error is ±1ADC0.20V~9.99~10.0~100V(±1V)DC0.03A~9.99~100A (±1A) Package include: 1*Voltage current power meter2* power supply load lineM520 Blue/Red 5-30V 10A 4 Wire M520 is a voltage, current and power measuring instrument. It can only measure and display the voltage, current and power of the circuit under test. The displayed value can be fine-tuned through an adjustable resistance. The actual voltage and current of the loop has no effect.Do not work with high voltage above 20V during use, otherwise it will easily cause overvoltage damage to the product.The 10A range product comes with a shunt resistor, and there will be a short circuit at the test end of the direct current measurement. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.This only has a 10A range, no 50A and 100A ranges. Operating VoltageThe working voltage of the instrument is DC 5~30V, and 5~12V is recommended.The thin red wire is the positive pole of the working power supply, and the thin black wire is the negative pole of the working power supply, which belongs to the common ground with the thick black wire; the limit voltage connected to the thin red and black wire cannot exceed 24V, and 12V power supply is recommended. Measuring rangeThe voltage measurement range is 0~100V, the display mode below 10V is 0.0V, the voltage starts from 0.1V, the error range is ±1V, the current measurement range is 0~10A, the current starts from 0.03A, and the error starts from ±3% Shunt resistorOn-board shunt resistor, no need for external shunt, just use it directly according to the wiring diagramThe shunt resistance is connected in parallel with the current test line, and the no-load test will cause a short circuit alarm. When using, connect the thick red line to the negative pole of the load according to the wiring diagram for normal use. Standard leadXH-2.54-3P red, black and yellow wire (total length of thin wire: 155mm)Thin red wire: positive pole of the working power supply, can not be connected to a power supply above 30VThin black wire: the negative pole of the working power supply, and the thick black wire on the construction site, do not need to be connected when sharing the power supplyThin yellow wire: voltage test wire, connected to the positive pole of the test circuit power supply VH-3.96-2P red and black wire (thick wire total length: 165mm) current test wireThick red wire: the positive pole of the current test, which is connected to the negative pole of the load.Thick black wire: current test negative pole, connect to power supply negative pole, connect first and then break when disconnected Voltage display fine-tuningIt is a display fine adjustment, not a major adjustment, the adjustment is the display voltage, but the actual voltage cannot be adjusted!See the round adjustable resistor of V-ADJ, find a flat-blade screwdriver and twist it! No-load current does not return to zeroNeither does this feature! Display powerReal-time power will alternate with current (about 10 seconds alternate) Pacakage Include:1*Voltage current power meter1*Power cable1*Load line 100V 10A Voltmeter Ammeter Specifications:Working voltage of Meter itself: DC 4 - 30V(The maximum input voltage can not exceed 30V. Otherwise the meter will be burned)Working current of Meter itself: ≤20mAVoltage Measuring range: DC 0 - 100VCurrent Measuring range: DC 0 - 10AVoltage resolution (V): 0.1VCurrent resolution (A): 0.01AMeasure accuracy: 1% (± 1 digit)Display: 0.28" digital tube, Two color blue and redRefresh rate: about 300mS / timesDimensions:48mm*29mm*26mmOperation Temp: -10℃ ~ +65℃ Package Included:2 x DC 100V 10A Dual Digital Red&Blue LED Voltmeter Ammeter Shipping PolicyPayment MethodReturns PolicyShipping Policy We only accept your Ebay Address,Please Make sure it's 100% right. The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually.We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor negative feedback, so that we can satisfactorily address your concerns. Payment MethodThis is the description of Payment Method. Do not dismiss your dream.To be without dream is to be without hope.To be without hope is to be without purpose.Do not run through your life so fast that you forget not only where you have been, but also where you are going.Life is not race, but a journey to be savored each step of the way.Returns PolicyThis is the description of Returns Policy. Do not dismiss your dream.To be without dream is to be without hope.To be without hope is to be without purpose.Do not run through your life so fast that you forget not only where you have been, but also where you are going.Life is not race, but a journey to be savored each step of the way.Copyright©2017 DataCaciquesM430/M520 DC4-30V DC100A Current Voltmeter Ammeter Dual LED 4/5-Wire Display New Item DescriptionM430 4-30V 10A/50/100A 4 Wire50A /100A must be used with a shuntM430 is a voltage, current and power measuring instrument. It can only measure and display the voltage, current and power of the circuit under test. The displayed value can be fine-tuned through an adjustable resistance. It does not have the functions of buck-boost or current limiting. The actual voltage and current of the loop has no effect.Do not use high voltage above 30V when using, otherwise it will cause overvoltage damage to the product.The 10A range product comes with a shunt resistor, and there will be a short circuit at the test end of the direct current measurement. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.50A/100A range products need an external shunt for normal use. After connecting the shunt, there will be a short circuit at the test terminal to directly measure the current. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.According to different current ranges, it is divided into 10A, 50A, 100A. Operating Voltage The working voltage of the instrument is DC 4~30V, and 5~12V is recommended.The thin red wire is the positive pole of the working power supply, and the thin black wire is the negative pole of the working power supply, which belongs to the common ground with the thick black wire;When using, the limit voltage connected to the thin red and black wires cannot exceed 30V, and 12V power supply is recommended Measuring range10A: Voltage measurement range is 0~100V, display mode below 10V is 0.00V, voltage starts at 0.2V, error range is ±1V, current measurement range is 0~10A, current starts at 0.03A, error is ±0.1ADC0.20V~9.99~10.0~100V (±1M)DC0.03A~9.99A (±0.1) 50A: The voltage measurement range is 0~100V, the display mode below 10V is 0.00V, the voltage starts at 0.2V, the error range is ±1V, the current measurement range is 0~50A, the current starts at 0.03A, and the error is ±0.5ADC0.20V~9.99~10.0~10OV (±1V)DC0.03A~9.99~50.0A (±0.5A) 100A: Voltage measurement range is 0~100V, display mode below 10V is 0.00V, voltage starts at 0.20V, error range is ±1V, current measurement range is 0~100A, current starts at 0.03A, error is ±1ADC0.20V~9.99~10.0~100V(±1V)DC0.03A~9.99~100A (±1A) Package include: 1*Voltage current power meter2* power supply load lineM520 Blue/Red 5-30V 10A 4 Wire M520 is a voltage, current and power measuring instrument. It can only measure and display the voltage, current and power of the circuit under test. The displayed value can be fine-tuned through an adjustable resistance. The actual voltage and current of the loop has no effect.Do not work with high voltage above 20V during use, otherwise it will easily cause overvoltage damage to the product.The 10A range product comes with a shunt resistor, and there will be a short circuit at the test end of the direct current measurement. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally.This only has a 10A range, no 50A and 100A ranges. Operating VoltageThe working voltage of the instrument is DC 5~30V, and 5~12V is recommended.The thin red wire is the positive pole of the working power supply, and the thin black wire is the negative pole of the working power supply, which belongs to the common ground with the thick black wire; the limit voltage connected to the thin red and black wire cannot exceed 24V, and 12V power supply is recommended. Measuring rangeThe voltage measurement range is 0~100V, the display mode below 10V is 0.0V, the voltage starts from 0.1V, the error range is ±1V, the current measurement range is 0~10A, the current starts from 0.03A, and the error starts from ±3% Shunt resistorOn-board shunt resistor, no need for external shunt, just use it directly according to the wiring diagramThe shunt resistance is connected in parallel with the current test line, and the no-load test will cause a short circuit alarm. When using, connect the thick red line to the negative pole of the load according to the wiring diagram for normal use. Standard leadXH-2.54-3P red, black and yellow wire (total length of thin wire: 155mm)Thin red wire: positive pole of the working power supply, can not be connected to a power supply above 30VThin black wire: the negative pole of the working power supply, and the thick black wire on the construction site, do not need to be connected when sharing the power supplyThin yellow wire: voltage test wire, connected to the positive pole of the test circuit power supply VH-3.96-2P red and black wire (thick wire total length: 165mm) current test wireThick red wire: the positive pole of the current test, which is connected to the negative pole of the load.Thick black wire: current test negative pole, connect to power supply negative pole, connect first and then break when disconnected Voltage display fine-tuningIt is a display fine adjustment, not a major adjustment, the adjustment is the display voltage, but the actual voltage cannot be adjusted!See the round adjustable resistor of V-ADJ, find a flat-blade screwdriver and twist it! No-load current does not return to zeroNeither does this feature! Display powerReal-time power will alternate with current (about 10 seconds alternate) Pacakage Include:1*Voltage current power meter1*Power cable1*Load line 100V 10A Voltmeter Ammeter Specifications:Working voltage of Meter itself: DC 4 - 30V(The maximum input voltage can not exceed 30V. Otherwise the meter will be burned)Working current of Meter itself: ≤20mAVoltage Measuring range: DC 0 - 100VCurrent Measuring range: DC 0 - 10AVoltage resolution (V): 0.1VCurrent resolution (A): 0.01AMeasure accuracy: 1% (± 1 digit)Display: 0.28" digital tube, Two color blue and redRefresh rate: about 300mS / timesDimensions:48mm*29mm*26mmOperation Temp: -10℃ ~ +65℃ Package Included:2 x DC 100V 10A Dual Digital Red&Blue LED Voltmeter Ammeter Payment1.We only accept payment from PayPal. 2.Please make sure your eBay address is correct before you pay. 3.All payment Should be Completed within 7 days, or an unpaid disputed will be opened as payment none receive. 4.If you do not want to pay for the order please contact us via eBay message, we will help your cancel the transaction. Shipping 1. We only ship to confirmed ebay addresses. 2. Economy Shipping, don't have tracking number. Standard Shipping, with tracking number. Express (Expedited) Shipping, with tracking number. If you need a tracking number, you could choose Standard Shipping. 3. Economy shipping needs 2-5 weeks to arrive mostly. In rare case, it can take up to 6-8 weeks. It depends on your location and local postal service, as well as the weather condition along the shipping. 4. If you need a faster delivery time, you could choose Express (Expedited) Shipping. Return 1. We offer 60 day money back or replacement guarantee. In addition, it allows customers to return new and unused products in their original factory condition for any reason within 60 days from the date of purchase. 2. Although we test each item and they are packed professionally, few item(less than 0.1%) might be damaged during the shipping. Please feel free to contact us within 7 days after you receive your package about replacement. 3. If you don't receive items over 35days ,please make sure to contact us before leaving any neutral or negative feedback.We'll try our best to help you solve the problem. If we authorized the return, customers will get an email with instructions for returning the item. Email will be replied within 24 hours on Chinese business hours. The sole and exclusive maximum liability to lifesteward arising from any product sold on lifesteward ebay account shall be the price of the product ordered. Feedback 1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase. 2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer. 3. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.

Price: 7.49 USD

Location: Jamaica, New York

End Time: 2024-09-04T05:42:31.000Z

Shipping Cost: 0 USD