MCP2515 Module CAN Bus TJA1050 Receiver Transceiver SPI Arduino Interface USA

Description: Description: Microchip Technology’s MCP2515 is a stand-alone Controller Area Network (CAN Bus) controller that implements the CAN 2.0B specification. It is capable of transmitting and receiving both standard (11-bit) and extended (29-bit) data and remote frames. The MCP2515 has two acceptance masks and six acceptance filters that are used to filter out unwanted messages, thereby reducing the host MCU’s overhead. The MCP2515 interfaces with microcontrollers (MCUs) via an industry standard Serial Peripheral Interface (SPI). The TJA1050 is a high-speed CAN Bus transceiver, and it represents the interface between the Controller Area Network (CAN Bus) protocol controller, i.e. the Microchip MCP2515, and the physical bus. The device provides differential voltage for transmission to the CAN bus and TTL signals for receive capability to the CAN Bus controller. Support CAN V2.0B specification, the communication speed 1Mb / S - 0 to 8-byte data field - Standard frame and expand the frame and remote frame - 5V DC power supply module, SPI interface protocol control - 120 ohm termination resistors. Impedance matching, ensure drive capacity long-distance data transmission against signal radiation - Working current: typ. 5mA, 1 microamp standby current. Except the power indicator - Working temperature: Industrial grade to 85 ℃ -40 ℃ Specification: - Size: Approx. 4.4x 2.8cm/ 1.73x 1.10inch - Screw hole center spacing: Approx. 23x 38mm/ 0.91x 1.50inch Package Included: 1 x MCP2515 Module CAN Bus TJA1050 Receiver Transceiver SPI Arduino We don't provide technical assistance please make sure that you are familiar with the product before purchasing.

Price: 3.24 USD

Location: Addison, Illinois

End Time: 2023-08-28T20:08:37.000Z

Shipping Cost: N/A USD