Morningstar ProStar PS-30M PWM 30A Charge Controller with Display 12/24V GEN3

Description: Morningstar ProStar PS-30M Solar Panel Charge Controller 12/24 V Morningstar Corporation ProStar PWM Charge Controller 12/24V, 30A with Display PS-30M Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. This second generation ProStar adds new features and protections using highly advanced technology. These improvements provide longer battery life and improved system performance. The ProStar line of controllers set new standards for reliability and self-diagnostics. The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status. Features: PWM series battery charging (not shunt)3-position battery select: gel, sealed or floodedVery accurate control and measurementJumper to eliminate telecom noiseTropicalization: conformal coating, stainless steel fasteners & anodized aluminum heat sinkCurrent compensated low voltage disconnect (LVD)LED’s indicate battery status and faultsCapable of 25% overloads5 Year Warranty Electronic Protections: Short-circuit — solar and loadOverload — solar and loadReverse polarityReverse current at nightHigh voltage disconnectHigh temperature disconnectLightning and transient surge protectionLoads protected from voltage spikesAutomatic recovery with all protections Specifications: PS-15 PS-30 PS15M-48VRated Solar Current 15 Amps 30 Amps 15 Amps Rated Load Current 15A 30A 15A System Voltage 12/24V 12/24V 48V Temp. Comp. (mV/°C)* – 30mV – 60mV – 120mVAccuracy 40mV 60mV 80mVMin. voltage to operate 8V 8V 15VSelf-consumption 22mA 25mA 28mALVD current coefficient** – 20mV – 40mV – 80mVCharge algorithm PWM, constant voltageOperating temperature – 40°C to + 60°C Detailed Description Electronic: Short-circuit — solar and load Overload — solar and load Reverse polarity Reverse current at night High voltage disconnect High temperature disconnect Lightning and transient surge protection Loads protected from voltage spikes Automatic recovery with all protections Charging: Night Disconnect: The solar array automatically disconnects at night to prevent reverse current leakage from the battery. Battery Sense: Good battery performance requires accurate charging. Voltage drops in the battery power cables can distort the battery charging. The Sense wires eliminate the voltage drops for optimized charging. Temperature Compensation: Four control setpoints (25°C reference) are compensated for temperature (PWM regulation, float, equalization, high voltage disconnect). The charging is compensated by –5 mV/°C /cell (–30mV/°C for a 12V battery). Compensation is limited to minus 30°C. Remote Temperature Probe: An optional probe is available to measure temperature at a location away from the controller. This requires soldering 2 wires to the ProStar PCB. Options: Digital meter A precision 3-digit digital meter will continuously display battery voltage, solar current, and the load current. The meter automatically scrolls through these 3 displays. The 3 red LEDs will indicate which parameter is being displayed. The digital meter will operate from –30°C to +85°C. The values displayed are calibrated electronically in production and are accurate to within a few percent. Please note, however, that if the Battery Sense is not connected, the voltage displayed will be in error by the voltage drops in the battery wires. Highly accurate voltage and current display Low self-consumption (1 mA) Includes manual disconnect button Displays 5 different protection functions and disconnect conditions Self-diagnostics (self-test) provides a comprehensive test of the ProStar — Displays 9 different controller status parameters, including temperature Displays detected faultsPositive ground Remote temperature probe An optional remote temperature probe can be soldered to the ProStar assembly at any time. The standard cable length is 25 ft (7.6 m), and this can easily be extended to 100 ft (30 m) or longer. The 2 probe wires are soldered to the main board assembly between the temperature sensor and the green LED, at "J12". Optimized Battery Charging: The ProStar has 4 stages of charging to provide increased battery capacity and life. Recharging with 100% of available solar energy. PWM constant-voltage regulation to prevent heating and excessive battery gassing. Pulse charging to restore full battery capacity. Float: After battery is fully recharged, ProStar reduces to a float or trickle charge. The transition depends on battery history. A load that exceeds available solar output will return ProStar to the PWM mode. Equalize: A boost charge that depends on elapsed time and battery history. Flooded cells receive a vigorous equalization, sealed batteries a smaller boost to bring uneven cells into balance and extend the battery life. Gel cells are not equalized. Battery Voltage Setpoints* The Battery Type rotary switch allows selection of 1 of 3 charging algorithms. These are broadly defined as the following battery types as noted on the lower label: Gel: Some gel and other battery types recommend lower regulation voltages and no equalization. This setting regulates to 14.0V (for a 12V battery). Sealed: AGM, "maintenance free" and some types of gel batteries. Regulates to 14.15V (12V battery) with 14.35V boost charging. Flooded: Vented cells that require water to be added. Regulates to 14.4V with 14.9V and 15.1V equalizations (12V battery). Gel Sealed FloodedRegulation Voltage 14.0 14.15 14.4Float 13.7 13.7 13.7Equalization n/a 14.35 14.9/15.1Load Disconnect 11.4 11.4 11.4Load Reconnect 12.6 12.6 12.6Note: values are for 12V. Use 2X for 24V and 4X for 48V. *25°C reference ProStar Model Comparison: Model Number Digital Meter Positive Ground Remote Temp. ProbePS-15 yes no yesPS-30 yes yes yesPS-15M standard no yesPS-30M> standard yes yesPS-15M-48V standard yes yesPS-30M-PG standard standard yesPS-15M-48V-PG standard standard yes Standard: This item is included.Yes: This item is compatible, but not included.No: This item is not compatible. ProStar controller part numbers that end with an 'M' feature the optional digital meter display (PS-15M, PS-30M, PS-15M-48V). Digital meter: Highly accurate voltage and current displayLow self-consumption (1 mA)Includes manual disconnect buttonDisplays 5 different protection functions and disconnect conditionsSelf-diagnostics (self-test) provides a comprehensive test of the ProStar — Displays 9 different controller status parameters, including temperatureDisplays detected faults Optimized Battery Charging: The ProStar has 4 stages of charging to provide increased battery capacity and life. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Morningstar Corporation ProStar PWM Charge Controller 12/24V, 30A with Display PS-30M Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. This second generation ProStar adds new features and protections using highly advanced technology. These improvements provide longer battery life and improved system performance. The ProStar line of controllers set new standards for reliability and self-diagnostics. The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status. Features ---PWM series battery charging (not shunt) ---3-position battery select: gel, sealed or flooded ---Very accurate control and measurement ---Jumper to eliminate telecom noise ---Tropicalization: conformal coating, stainless steel fasteners & anodized aluminum heat sink ---Current compensated low voltage disconnect (LVD) ---LED’s indicate battery status and faults ---Capable of 25% overloads ---5 Year Warranty Electronic Protections ---Short-circuit — solar and load ---Overload — solar and load ---Reverse polarity ---Reverse current at night ---High voltage disconnect ---High temperature disconnect ---Lightning and transient surge protection ---Loads protected from voltage spikes ---Automatic recovery with all protections Specifications PS-15 PS-30 PS15M-48V Rated Solar Current 15 Amps 30 Amps 15 Amps Rated Load Current 15A 30A 15A System Voltage 12/24V 12/24V 48V Temp. Comp. (mV/°C)* – 30mV – 60mV – 120mV Accuracy 40mV 60mV 80mV Min. voltage to operate 8V 8V 15V Self-consumption 22mA 25mA 28mA LVD current coefficient** – 20mV – 40mV – 80mV Charge algorithm PWM, constant voltage Operating temperature – 40°C to + 60°C Detailed Description Electronic ---Short-circuit — solar and load ---Overload — solar and load ---Reverse polarity ---Reverse current at night ---High voltage disconnect ---High temperature disconnect ---Lightning and transient surge protection ---Loads protected from voltage spikes ---Automatic recovery with all protections Charging ---Night Disconnect: The solar array automatically disconnects at night to prevent reverse current leakage from the battery. ---Battery Sense: Good battery performance requires accurate charging. Voltage drops in the battery power cables can distort the battery charging. The Sense wires eliminate the voltage drops for optimized charging. ---Temperature Compensation: Four control setpoints (25°C reference) are compensated for temperature (PWM regulation, float, equalization, high voltage disconnect). The charging is compensated by –5 mV/°C /cell (–30mV/°C for a 12V battery). Compensation is limited to minus 30°C. ---Remote Temperature Probe: An optional probe is available to measure temperature at a location away from the controller. This requires soldering 2 wires to the ProStar PCB. Options ---Digital meter A precision 3-digit digital meter will continuously display battery voltage, solar current, and the load current. The meter automatically scrolls through these 3 displays. The 3 red LEDs will indicate which parameter is being displayed. The digital meter will operate from –30°C to +85°C. The values displayed are calibrated electronically in production and are accurate to within a few percent. Please note, however, that if the Battery Sense is not connected, the voltage displayed will be in error by the voltage drops in the battery wires. ------Highly accurate voltage and current display ------Low self-consumption (1 mA) ------Includes manual disconnect button ------Displays 5 different protection functions and disconnect conditions ------Self-diagnostics (self-test) provides a comprehensive test of the ProStar — ---------Displays 9 different controller status parameters, including temperature ---------Displays detected faults ---Positive ground ---Remote temperature probe An optional remote temperature probe can be soldered to the ProStar assembly at any time. The standard cable length is 25 ft (7.6 m), and this can easily be extended to 100 ft (30 m) or longer. The 2 probe wires are soldered to the main board assembly between the temperature sensor and the green LED, at "J12". Optimized Battery Charging The ProStar has 4 stages of charging to provide increased battery capacity and life. 1--Recharging with 100% of available solar energy. 2--PWM constant-voltage regulation to prevent heating and excessive battery gassing. Pulse charging to restore full battery capacity. 3--Float: After battery is fully recharged, ProStar reduces to a float or trickle charge. The transition depends on battery history. A load that exceeds available solar output will return ProStar to the PWM mode. 4--Equalize: A boost charge that depends on elapsed time and battery history. Flooded cells receive a vigorous equalization, sealed batteries a smaller boost to bring uneven cells into balance and extend the battery life. Gel cells are not equalized. Battery Voltage Setpoints* The Battery Type rotary switch allows selection of 1 of 3 charging algorithms. These are broadly defined as the following battery types as noted on the lower label: 1--Gel: Some gel and other battery types recommend lower regulation voltages and no equalization. This setting regulates to 14.0V (for a 12V battery). 2--Sealed: AGM, "maintenance free" and some types of gel batteries. Regulates to 14.15V (12V battery) with 14.35V boost charging. 3--Flooded: Vented cells that require water to be added. Regulates to 14.4V with 14.9V and 15.1V equalizations (12V battery). Gel Sealed Flooded Regulation Voltage 14.0 14.15 14.4 Float 13.7 13.7 13.7 Equalization n/a 14.35 14.9/15.1 Load Disconnect 11.4 11.4 11.4 Load Reconnect 12.6 12.6 12.6 Note: values are for 12V. Use 2X for 24V and 4X for 48V. *25°C reference ProStar Model Comparison: Model Number Digital Meter Positive Ground Remote Temp. Probe PS-15 yes no yes PS-30 yes yes yes PS-15M standard no yes PS-30M> standard yes yes PS-15M-48V standard yes yes PS-30M-PG standard standard yes PS-15M-48V-PG standard standard yes Standard: This item is included. Yes: This item is compatible, but not included. No: This item is not compatible. ProStar controller part numbers that end with an 'M' feature the optional digital meter display (PS-15M, PS-30M, PS-15M-48V). Digital meter ---Highly accurate voltage and current display ---Low self-consumption (1 mA) ---Includes manual disconnect button ---Displays 5 different protection functions and disconnect conditions ---Self-diagnostics (self-test) provides a comprehensive test of the ProStar — ------Displays 9 different controller status parameters, including temperature ------Displays detected faults Optimized Battery Charging: The ProStar has 4 stages of charging to provide increased battery capacity and life. [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=1) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application Morningstar ProStar PS-30M Solar Panel Charge Controller 12/24 V Morningstar Corporation ProStar PWM Charge Controller 12/24V, 30A with Display PS-30M Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. This second generation ProStar adds new features and protections using highly advanced technology. These improvements provide longer battery life and improved system performance. The ProStar line of controllers set new standards for reliability and self-diagnostics. The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status. Features PWM series battery charging (not shunt)3-position battery select: gel, sealed or floodedVery accurate control and measurementJumper to eliminate telecom noiseTropicalization: conformal coating, stainless steel fasteners & anodized aluminum heat sinkCurrent compensated low voltage disconnect (LVD)LED’s indicate battery status and faultsCapable of 25% overloads5 Year Warranty Electronic Protections Short-circuit — solar and loadOverload — solar and loadReverse polarityReverse current at nightHigh voltage disconnectHigh temperature disconnectLightning and transient surge protectionLoads protected from voltage spikesAutomatic recovery with all protections Specifications PS-15 PS-30 PS15M-48VRated Solar Current 15 Amps 30 Amps 15 Amps Rated Load Current 15A 30A 15A System Voltage 12/24V 12/24V 48V Temp. Comp. (mV/°C)* – 30mV – 60mV – 120mVAccuracy 40mV 60mV 80mVMin. voltage to operate 8V 8V 15VSelf-consumption 22mA 25mA 28mALVD current coefficient** – 20mV – 40mV – 80mVCharge algorithm PWM, constant voltageOperating temperature – 40°C to + 60°CDetailed Description Electronic Short-circuit — solar and load Overload — solar and load Reverse polarity Reverse current at night High voltage disconnect High temperature disconnect Lightning and transient surge protection Loads protected from voltage spikes Automatic recovery with all protectionsCharging Night Disconnect: The solar array automatically disconnects at night to prevent reverse current leakage from the battery. Battery Sense: Good battery performance requires accurate charging. Voltage drops in the battery power cables can distort the battery charging. The Sense wires eliminate the voltage drops for optimized charging. Temperature Compensation: Four control setpoints (25°C reference) are compensated for temperature (PWM regulation, float, equalization, high voltage disconnect). The charging is compensated by –5 mV/°C /cell (–30mV/°C for a 12V battery). Compensation is limited to minus 30°C. Remote Temperature Probe: An optional probe is available to measure temperature at a location away from the controller. This requires soldering 2 wires to the ProStar PCB.Options Digital meter A precision 3-digit digital meter will continuously display battery voltage, solar current, and the load current. The meter automatically scrolls through these 3 displays. The 3 red LEDs will indicate which parameter is being displayed. The digital meter will operate from –30°C to +85°C. The values displayed are calibrated electronically in production and are accurate to within a few percent. Please note, however, that if the Battery Sense is not connected, the voltage displayed will be in error by the voltage drops in the battery wires. Highly accurate voltage and current display Low self-consumption (1 mA) Includes manual disconnect button Displays 5 different protection functions and disconnect conditions Self-diagnostics (self-test) provides a comprehensive test of the ProStar — Displays 9 different controller status parameters, including temperature Displays detected faultsPositive ground Remote temperature probe An optional remote temperature probe can be soldered to the ProStar assembly at any time. The standard cable length is 25 ft (7.6 m), and this can easily be extended to 100 ft (30 m) or longer. The 2 probe wires are soldered to the main board assembly between the temperature sensor and the green LED, at "J12".Optimized Battery Charging The ProStar has 4 stages of charging to provide increased battery capacity and life. Recharging with 100% of available solar energy. PWM constant-voltage regulation to prevent heating and excessive battery gassing. Pulse charging to restore full battery capacity. Float: After battery is fully recharged, ProStar reduces to a float or trickle charge. The transition depends on battery history. A load that exceeds available solar output will return ProStar to the PWM mode. Equalize: A boost charge that depends on elapsed time and battery history. Flooded cells receive a vigorous equalization, sealed batteries a smaller boost to bring uneven cells into balance and extend the battery life. Gel cells are not equalized.Battery Voltage Setpoints* The Battery Type rotary switch allows selection of 1 of 3 charging algorithms. These are broadly defined as the following battery types as noted on the lower label: Gel: Some gel and other battery types recommend lower regulation voltages and no equalization. This setting regulates to 14.0V (for a 12V battery). Sealed: AGM, "maintenance free" and some types of gel batteries. Regulates to 14.15V (12V battery) with 14.35V boost charging. Flooded: Vented cells that require water to be added. Regulates to 14.4V with 14.9V and 15.1V equalizations (12V battery). Gel Sealed FloodedRegulation Voltage 14.0 14.15 14.4Float 13.7 13.7 13.7Equalization n/a 14.35 14.9/15.1Load Disconnect 11.4 11.4 11.4Load Reconnect 12.6 12.6 12.6Note: values are for 12V. Use 2X for 24V and 4X for 48V. *25°C reference ProStar Model Comparison: Model Number Digital Meter Positive Ground Remote Temp. ProbePS-15 yes no yesPS-30 yes yes yesPS-15M standard no yesPS-30M> standard yes yesPS-15M-48V standard yes yesPS-30M-PG standard standard yesPS-15M-48V-PG standard standard yes Standard: This item is included.Yes: This item is compatible, but not included.No: This item is not compatible. ProStar controller part numbers that end with an 'M' feature the optional digital meter display (PS-15M, PS-30M, PS-15M-48V). Digital meter Highly accurate voltage and current displayLow self-consumption (1 mA)Includes manual disconnect buttonDisplays 5 different protection functions and disconnect conditionsSelf-diagnostics (self-test) provides a comprehensive test of the ProStar — Displays 9 different controller status parameters, including temperatureDisplays detected faults Optimized Battery Charging: The ProStar has 4 stages of charging to provide increased battery capacity and life. FREE! Sellers: Add a FREE map to your listings. FREE! Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Morningstar Corporation ProStar PWM Charge Controller 12/24V, 30A with Display PS-30M Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. This second generation ProStar adds new features and protections using highly advanced technology. These improvements provide longer battery life and improved system performance. The ProStar line of controllers set new standards for reliability and self-diagnostics. The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status. Features PWM series battery charging (not shunt)3-position battery select: gel, sealed or floodedVery accurate control and measurementJumper to eliminate telecom noiseTropicalization: conformal coating, stainless steel fasteners & anodized aluminum heat sinkCurrent compensated low voltage disconnect (LVD)LED’s indicate battery status and faultsCapable of 25% overloads5 Year Warranty Electronic Protections Short-circuit — solar and loadOverload — solar and loadReverse polarityReverse current at nightHigh voltage disconnectHigh temperature disconnectLightning and transient surge protectionLoads protected from voltage spikesAutomatic recovery with all protections Specifications PS-15 PS-30 PS15M-48VRated Solar Current 15 Amps 30 Amps 15 Amps Rated Load Current 15A 30A 15A System Voltage 12/24V 12/24V 48V Temp. Comp. (mV/°C)* – 30mV – 60mV – 120mVAccuracy 40mV 60mV 80mVMin. voltage to operate 8V 8V 15VSelf-consumption 22mA 25mA 28mALVD current coefficient** – 20mV – 40mV – 80mVCharge algorithm PWM, constant voltageOperating temperature – 40°C to + 60°CDetailed Description Electronic Short-circuit — solar and load Overload — solar and load Reverse polarity Reverse current at night High voltage disconnect High temperature disconnect Lightning and transient surge protection Loads protected from voltage spikes Automatic recovery with all protectionsCharging Night Disconnect: The solar array automatically disconnects at night to prevent reverse current leakage from the battery. Battery Sense: Good battery performance requires accurate charging. Voltage drops in the battery power cables can distort the battery charging. The Sense wires eliminate the voltage drops for optimized charging. Temperature Compensation: Four control setpoints (25°C reference) are compensated for temperature (PWM regulation, float, equalization, high voltage disconnect). The charging is compensated by –5 mV/°C /cell (–30mV/°C for a 12V battery). Compensation is limited to minus 30°C. Remote Temperature Probe: An optional probe is available to measure temperature at a location away from the controller. This requires soldering 2 wires to the ProStar PCB.Options Digital meter A precision 3-digit digital meter will continuously display battery voltage, solar current, and the load current. The meter automatically scrolls through these 3 displays. The 3 red LEDs will indicate which parameter is being displayed. The digital meter will operate from –30°C to +85°C. The values displayed are calibrated electronically in production and are accurate to within a few percent. Please note, however, that if the Battery Sense is not connected, the voltage displayed will be in error by the voltage drops in the battery wires. Highly accurate voltage and current display Low self-consumption (1 mA) Includes manual disconnect button Displays 5 different protection functions and disconnect conditions Self-diagnostics (self-test) provides a comprehensive test of the ProStar — Displays 9 different controller status parameters, including temperature Displays detected faultsPositive ground Remote temperature probe An optional remote temperature probe can be soldered to the ProStar assembly at any time. The standard cable length is 25 ft (7.6 m), and this can easily be extended to 100 ft (30 m) or longer. The 2 probe wires are soldered to the main board assembly between the temperature sensor and the green LED, at "J12".Optimized Battery Charging The ProStar has 4 stages of charging to provide increased battery capacity and life. Recharging with 100% of available solar energy. PWM constant-voltage regulation to prevent heating and excessive battery gassing. Pulse charging to restore full battery capacity. Float: After battery is fully recharged, ProStar reduces to a float or trickle charge. The transition depends on battery history. A load that exceeds available solar output will return ProStar to the PWM mode. Equalize: A boost charge that depends on elapsed time and battery history. Flooded cells receive a vigorous equalization, sealed batteries a smaller boost to bring uneven cells into balance and extend the battery life. Gel cells are not equalized.Battery Voltage Setpoints* The Battery Type rotary switch allows selection of 1 of 3 charging algorithms. These are broadly defined as the following battery types as noted on the lower label: Gel: Some gel and other battery types recommend lower regulation voltages and no equalization. This setting regulates to 14.0V (for a 12V battery). Sealed: AGM, "maintenance free" and some types of gel batteries. Regulates to 14.15V (12V battery) with 14.35V boost charging. Flooded: Vented cells that require water to be added. Regulates to 14.4V with 14.9V and 15.1V equalizations (12V battery). Gel Sealed FloodedRegulation Voltage 14.0 14.15 14.4Float 13.7 13.7 13.7Equalization n/a 14.35 14.9/15.1Load Disconnect 11.4 11.4 11.4Load Reconnect 12.6 12.6 12.6Note: values are for 12V. Use 2X for 24V and 4X for 48V. *25°C reference ProStar Model Comparison: Model Number Digital Meter Positive Ground Remote Temp. ProbePS-15 yes no yesPS-30 yes yes yesPS-15M standard no yesPS-30M> standard yes yesPS-15M-48V standard yes yesPS-30M-PG standard standard yesPS-15M-48V-PG standard standard yes Standard: This item is included.Yes: This item is compatible, but not included.No: This item is not compatible. ProStar controller part numbers that end with an 'M' feature the optional digital meter display (PS-15M, PS-30M, PS-15M-48V). Digital meter Highly accurate voltage and current displayLow self-consumption (1 mA)Includes manual disconnect buttonDisplays 5 different protection functions and disconnect conditionsSelf-diagnostics (self-test) provides a comprehensive test of the ProStar — Displays 9 different controller status parameters, including temperatureDisplays detected faults Optimized Battery Charging: The ProStar has 4 stages of charging to provide increased battery capacity and life. FREE! Sellers: Add a FREE map to your listings. FREE! Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Price: 222.27 USD

Location: Roanoke, Virginia

End Time: 2025-01-03T20:55:03.000Z

Shipping Cost: N/A USD