Print Head 950 For HP Officejet Pro 8600 8610 8620 8630 8700 250DW 251DW

Description: Feature:1.EASY TO INSTALL: Follow these steps to reset your printer: Turn on the printer (if its not already on). Wait for the printer to come to a complete standstill before continuing. After turning on the printer, unplug the power cord from the back. Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet. This printhead kit comes with a printhead that is easy to install and requires no additional tools. Just push the print head into the printer (make sure to disconnect the power before installing)2.EXCELLENT AFTER-SALES SERVICE: If you have any questions or concerns, please feel free to contact us. We strive to provide a satisfactory answer within 24 hours. We offer a 90-day warranty on our products. Please feel free to contact us if you have any questions before or after your purchase. (Note: The print head contains a small amount of ink for testing, if there is any spillage during transportation, just wipe it with a damp paper towel, it is not a defect)3.RELIABLE PERFORMANCE: Our printheads are made from premium ABS material to ensure reliable and consistent prints, delivering crisp, vibrant documents and photos. The print head replacement kit has been rigorously tested and is compatible with HP Officejet Pro printers such as the 8100 8600 8610 8620 8650 8630 8625 8635 8640 8700 250DW 251DW 276DW printer.OEM Code:Cm751-80013aSuitable for HP: HP8100 HP8600 HP8610 HP8620 HP8625 HP8630 HP8700 HP8700 250DW 251DW 276DW 951 950XL 951XL CR324A/CM751-60126/ CM751-60186/CM751-80013A Notes and frequently asked questions:1. When connecting the plug cable, be sure not to bring ink, and make sure it is in good contact with the socket and does not touch the feet. Otherwise, the nozzle will be short-circuited and burned;2. The steel shaft must also be clean and smooth. You can wipe it with some lubricating oil on a paper towel. Do not add oil directly to the shaft. Excess oil will flow to the nozzle and cause damage;3. After the machinery and circuit are correct, it is time to check the waterway. First, check whether the amount of water in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and ink suction pump are dirty;4. There will be air in the newly installed nozzle, so it will not print normally immediately. Only after the air in the nozzle is completely discharged can the lines be produced normally; first, intermittent cleaning can be used (only clean 2 times at a time, and then stop for 30 minutes) Then wash it 2 times)Excessive cleaning for many times will cause ink accumulation in the cleaning pump, which will not only cause color mixing and leakage, but also waste ink; secondly, you can print more pictures to allow the nozzle to discharge air during work; thirdly, if the machine has been led out To remove the waste ink tube, you can turn off the power first.Then use a syringe with a rubber tube to pump out the waste ink tube until 3-5ml of ink is extracted. Then turn on the machine and clean it normally with the machine. This is equivalent to artificially forcefully extracting the air from the head. The side effect is that it is easy to cause cleaning. Pump piles ink. Package Included:1*Printer head

Price: 65.99 USD

Location: Bordentown, New Jersey

End Time: 2025-01-20T11:40:33.000Z

Shipping Cost: N/A USD