Radial ProRMP Passive ReAmper Direct Box for Guitar and Bass

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer Radial ProRMP Passive ReAmper Direct Box for Guitar and Bass Passive ReAmper - Open Box - Description Play pre-recorded tracks through amps and pedalsOn board level control for fine tuning amp levelTransformer isolated to eliminate buzz and humOpens the door to creative new tones and textures For years, Reamping has been the 'secret weapon' for countless recordings by the biggest names in the business! Few realize that recording engineers not only Reamp guitars, but often Reamp bass, keyboards, drums and even voice as a means to bring creative new tones and sonic signatures to their music. Reamping has many benefits. You start by recording a clean track and concentrate on capturing the best musical performance. Once the magic has been captured, send the clean track back to the amps and effects and adjust the sound to suit. No more hours of repetition for the guitarist, no more rushed jobs due to scheduling, and best of all, you do not have to commit to the sound of the track. You can modify the tone as the recording progresses while using real amps, effects and natural ambiance for the most organic tone. The Radial ProRMP is a 100% passive Reamper. This means it does not require any external powering. The magic behind the ProRMP's great tone is a custom wound transformer that at once converts the balanced line level source to a hi-z output for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound. Plug and play easy to use, the ProRMP connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit! Like all Radial products, the ProRMP is built tough! Encased in 14 gauge steel, the ProRMP employs a unique book-end design with a tough I-beam frame that protects it from damage and assures the PC board and solder points will not be stressed. A full-bottom no-slip pad works double duty by providing plenty of stay put while also eliminating electrical contact points from guitar amp chassis bolts that could cause ground loops. Reamping Step-1 Record the guitar track using a Radial direct box like the Pro48. This splits the signal so that the guitar player can hear his amp while you capture the clean (dry) performance. Reamping Step-2 Send the dry track from your recording system to the ProRMP. This then feeds your guitar amp and pedals. Adjust the tone and move the mics until you get the sound you want. Using the ProRMP with a wireless system Most wireless systems simply do not sound all that good. Take the balanced output from the wireless and send it through the ProRMP. You will be amazed at the warmth! Reamping began in the earliest days of recording and gained roots when bands such as the Beatles and Steely Dan used the process. Engineer and producer John Cuniberti patented the first dedicated Reamp in the 1990s and in 2010 Radial acquired the rights to the patent and trade name. The process involves taking a pre-recorded track and playing it back through a guitar amplifier and/or a series of effects pedals. Because the process of Reamping requires multiple tracks, it could only be done in large commercial studios where 24 track recorders were used. The advent of digital recording, followed by greater computing power, soon brought multitrack recording to the masses. And today, unlimited tracks make it possible for studios of all sizes to benefit from Reamping. The Radial ProRMP was developed to address this growing market. It is basically a more affordable version of the Radial Reamp JCR and designed to be plug & play easy to use. The passive design features an XLR input that connects from the recorder. The ProRMP's output is a standard ¼"" jack. This is used to feed a guitar amp or pedals. A recessed 'set & forget' level control lets you fine tune the signal level going into the amp. Reamping presents several advantages during the recording process :Capture the magic of the performance, not the sound. This way you are not tiring out the musician after countless repetitions. Each track sounds fresh and exciting.Change the amplifier, tone settings or even add pedals any time after the original has been recorded. You can always Reamp later if you are not satisfied with the sound.Experiment with mic placement or even moving the amps to a different room to capture the ideal tone, feel and room vibe. Add more than one mic for fun.Capture clean tracks when performing live and then replace the tracks by Reamping later in the studio. This way, you can capture the performance yet achieve studio level sound quality.Editing a clean (dry) track such as changing the pitch of fixing the timing is much easier than working with a wet distorted one. By capturing the most exciting performance you can truly fix it in the mix!No more bothering neighbors or sleeping kids. Quietly record a clean 'scratch track' at night and then Reamp it via the ProRMP to a blasting guitar amp the next day.Reamp bass, drums, keyboards and voice. Now you can add extra character to each track while still being able to keep as much of the original as you like and simply mix it in to suit.Add natural room ambiance to any track by Reamping it through a guitar amp or PA cabinet into a basement, hallway or even your bathroom!Add studio effects such as compressors, EQs, delays or reverbs before your amp to experiment with the new tones that these high end devices can create.By keeping the original clean track, you can always go back and Reamp it to suit the recording as it progresses ahead. (You also get a safety back-up track should disaster occur!) Reamping ensures that the same guitar sounds can be used even if the players change. This of course was part of the process used by various bands or record labels that wanted to retain the sound but improve the performance. A great trick to say the least! With a bit of practice and some creative ingenuity, great recordings can now be produced in almost any studio! The Radial ProRMP Reamp is a transformer coupled passive device designed to take a balanced line level signal and convert it so that it can drive the high input impedance of a guitar amplifier. As a passive device, it does not amplify the signal in any way. Critical to the performance is the frequency response and low distortion. The ProRMP is perfectly suited for Reamping and warming the balanced output of a wireless system. Features/Specs Audio Circuit Type : Passive, transformer isolatedFrequency Response : 20Hz ~ 20KHz (+0/-1dB)Dynamic Range : >137dBEquilavent Input Noise : >-98dBu Noise plus gainPhase Deviation : 0.3° @ 100Hz; 5° @ 20HzGain : >-10dBMaximum Input : >+26dBuTotal Harmonic Distortion : 0.003%Common Mode Rejection Ratio : 100dB @ 60Hz (unbalanced source)Input Impedance : 600 OhmsOutput Impedance : 600Ω, balancedNoise : -111dBuSignal To Noise Ratio : 81dBInput Pad : -15dB180° Polarity Reverse : Inverts signal polarityGround Lift : Disconnects pin-1 at XLR outputMerge : Input summing mixerSpeaker Filter : -30dB pad and band-pass filterXLR Configuration : AES standard (pin-2 hot) GeneralPower : Passive, no power requiredConstruction : 14 gauge steel chassis and outer shellFinish : Durable powder coatSize : Size : 3.3" x 5.0" x 2" (84 x 127 x 48mm)Conditions : For use in dry locations only between 5°C and 40°C We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 101.99 USD

Location: Winchester, Virginia

End Time: 2024-11-28T21:58:50.000Z

Shipping Cost: 0 USD