Reese 66540 Weight Distribution System w/ Shank - Trunnion Bar

Description: Create a stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch. Features:Evenly distributes weight over axles of tow vehicle and trailer for stability and controlCreates a more level ride for both tow vehicle and trailerTrunnion spring bars are hot rolled and tapered for superior strength and flexibilityBars flex appropriately over uneven terrain for a controlled, even rideCurved ends are designed for use with dual-cam sway control (RP26002 - sold separately)Adjustable spring-bar tension - just switch links in lift chains to fine-tuneDesired tilt is easily achieved with serrated-washer design - no more piling on washer after washerForged, raised ball platform on head eliminates need for raised hitch ballSolid steel shank has corrosion-resistant powder coatSystem includes head assembly, adjustable shank, lift brackets, trunnion spring bars, lift chains, pin and clip, and all necessary hardwareHitch ball sold separately - requires 1-1/4" diameter shank Specs:Tongue weight: 200 lbs - 600 lbsGross towing weight: 10,000 lbsFits: 2" x 2" trailer hitch receivers rated for use with weight-distribution systemsLift-bracket positioning: mount about 30" back from hitch ballRequires approximately 5-1/2" of space along trailer frameOptional mounts (sold separately) that take up less space on a trailer frame are availableWill not fit trailer frames wider than 2-1/2"Shank length: 14" from center of hitch pin hole to center of ball holeTotal height adjustment along shank: 5-1/4"Maximum rise: 6-1/2" from top of hitch receiver openingMaximum drop: 1-1/4" from top of hitch receiver openingLimited lifetime warranty High-performance system is designed to offer the best in weight distribution with an easy-to-adjust, forged head; a raised ball platform; and flexible, powder coated steel, trunnion spring bars. Adjustable shank included. Hitch ball sold separately. Selecting a Weight-Distribution SystemThe tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system. Unique Features of Reese Trunnion-Bar Weight DistributionThe easy-to-use, serrated washers on the Reese system make adjusting the tilt of the weight-distribution head a snap. This is a huge improvement over the standard pin-and-washer method, which involves piling washers - one on top of another - onto a difficult-to-access pin. The serrated-washer system lets you easily loosen, adjust and tighten a single washer and nut on either side of the head for simple, secure positioning. Patented Innovative designForged Integrated CamOne Piece Cast Steel HeadIncludes shank #54970

Price: 497.39 USD

Location: Joplin, Missouri

End Time: 2025-02-05T04:58:32.000Z

Shipping Cost: 48 USD