Sequential Plug And Play Turn Signal Kit Street Legal For Polaris Ranger 1000

Description: MCSADVENTURES plug and play turn signal kit for 18+ Ranger: 'L' Rocker switch: (blue), front: harness only MCSADVENTURES OEM sized Rocker turn signal kit Utilizing OEM size Carling rocker switch (snaps directly into Ranger switch holes) Fits 2018+ Ranger 1000 single cab Fits 2019+ Ranger 1000 crew cab (all trim levels including ride command) Plug and Play utilizing factory brake lights Custom rear T harness plugs into the left and right tail light harness Extended length harness fits 2 and 4 seat models Includes Pulse bar harness for newer 2019+ machines. Sequential LED turn signal tube fits above or below headlight No holes to drill Description Looking for a true plug and play way to add turn signals to your 2018+ Ranger 1000 that utilizes the factory tail lights? We've designed a great plug n play solution at a very reasonable price. Thinking of adding a hazard function and a horn later down the road? No problem! We've designed this system to accomodate. This harness is prewired with a connector ready to accept our combination hazard/horn kit available separately. Features This kit was born out of necessity. Specifically, on many late model Polaris Ranger models, the rocker switch holes on the left side of the dash may come pre punched making it near impossible to fit aftermarket sized switches into these locations. Problem solved: We utilize a Genuine Carling rocker switch matching the OEM switches already on the machine. These large robust switches snap right into the OEM knockout of 1.73 x .86 Not only do you get a great looking switch, the feel and function of the switch is 2nd to none. Simply put, this is how a rocker switch is supposed to feel. Our kit consists of 2 main harnesses: A front harness for the switch and control module. A rear T harness that plugs into each tail light and feeds through tunnel to plug into the front harness. Rocker switch harness is prewired into the main control module and simply plugs onto the back of the rocker switch. No fumbling with qd terminals or guessing what wire goes where. It simply plugs in. Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction. Includes optional instrument cluster integration for machines with the instrument cluster shown. We also supply a license plate light pigtail that can activate your license plate light with key on. (license plate light NOT included) A custom rear T harness plugs into the left and right factory tail lights and converts the factory brake lights for use as brake AND turn signals. Front indicators (2 per side) mount securely into a 3/4" diameter hole to provide a clean oem appearance. They sit nearly flush once mounted and will not fall out or come loose over time. This type of light has been proven over time in every condition imaginable. We do NOT subscribe to peel and stick strip lights others may use. Stick-on lighting will not last under the conditions these machines are subjected to. If you wish to purchase peel and stick strip lights and use them instead of these you are more than welcome to do so. Our belief is that a properly mounted light is just that.....mounted; not stuck onto your plastic with peel n stick tape where it will eventually pull away. Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights. All plug and play. Everything plugs together. Ships with a prewired power plug compatible with the Polaris Pulse bar system. No terminating. You simply plug it in! Specifications MADE IN USA Installation Info Painfully simple to install. Prewired rocker switch harness that plugs onto the rocker switch makes install a breeze. Rear T harness plugs into the left and right tail lights and feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module Front light and power harness simply feeds from inside the dash out into the hood area where you connect to the oem power terminals or plug it into your Pulse Bar. Mount front lights and route the left and right front harness to each light. Front sequential LED tubes simply press in place above or below headlight. (personal preference) and provide a sequential flowing amber turn signal function as well as optional daytime running lights (white) Only 3 power connections to make: 12v+ batt, 12v+ key on, 12v- (ground) Total install time: approx 45min. In no event shall Advance MCS Electronics, Inc., it's directors, officers, employees and representatives be liable for special, direct, indirect, consequential or punitive damages related to products sold or available from Advance MCS Electronics, Inc., even if made aware of the possibilty of such damages. By placing this order you agree to be solely responsible for liability for special, direct, indirect, consequential or punitive damages caused by the use, storage and misuse of products sold by or available from Advance MCS Electronics, Inc.

Price: 299 USD

Location: Goshen, Indiana

End Time: 2024-01-02T20:07:31.000Z

Shipping Cost: 0 USD