Description: Wall Hanging VersionThis version has a ring on back, embedded into the plaster for wall hanging the cast. If you would like it flat on the back for sitting on a desk or table for display please see my other offer. Original Supplier of Bigfoot Merchandise Online As the original supplier of Bigfoot Merchandise online, most of the copies you see are copies made from the cast I have been selling for almost 30 years, so make sure to get the best copy available from the original seller. This is an authentic copy casting from one of the Bigfoot track castings made in Bluff Creek, California shortly after the famous Patterson-Gimlin film was shot. The copy was shared with me by Ray Crowe who I would visit when I went to Oregon to continue the Bigfoot research that I started doing in California in 1993 on. As a professionally trained mold maker, I carefully created the silicone mold of that cast. Using fine art plaster along with proper mixing techniques and the best possible medical grade silicone mold, I have captured detail far greater than in any of the other techniques or other casting material. No reinforcements needed when done properly. Bigfoot Evidence - Bluff Creek, California 1967 On October 20, 1967, Roger Patterson and Bob Gimlin had an encounter in the northern California wilderness with a Sasquatch, which they captured on film. The 952 frames of 16mm film have become the most controversial, but convincing evidence of Bigfoot's existence to date. According to the historical record of the time there were ten footprints found during the October encounter and a number of castings were made from those. This a plaster copy of one of those castings taken over 50 years ago. Know what You're Getting Be aware! As more copies become available you will notice a level of quality. I can assure you that as a professional mold maker and plaster expert I clearly see issues with some of the other casts by new sellers. Take a look at their photos and notice the lack of fine detail, the type of detail you will see in the casts I make. This is because their mold is made poorly of a copy of a copy of a copy. Like a bad Xerox. Now those same vendors have become professional mold makers from the 90's as well. Quick research of domain registration shows them starting only 9 years ago. Look closely at the photos of the other casts if you are comparing, and you will see many small holes. This is due to poor plaster mixing and pouring techniques. Rather than taking time to do it right which takes longer, it is rushed to make them cheap and air bubbles occur. Some minor ones are typical, but many large ones as seen on other versions are not normal. Also by mixing materials in the casting will cause the defects. All those imperfections weaken the plaster which is why reinforcement is then needed and extra care in shipping, so they don’t break.Standard packing peanuts in a proper box is all you need. No reinforcements needed when done properly. Comes sealed with a thin layer of acrylic. Shop with Us for Quality Get the highest quality cast available, purchase your Bigfoot cast here from the original supplier. Providing Bigfoot enthusiasts with authentic Bigfoot merchandise since 1994.
Price: 34.99 USD
Location: New Orleans, Louisiana
End Time: 2024-11-01T15:49:15.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Modified Item: No
Country/Region of Manufacture: United States
