WeiShi No.1000 No.1900 Timegrapher Watch Testing Tool Watch Tester for Repairers

Description: NO.1900 The frequency diagram of the watch can be displayed on the LCD screen. According to different watches, the instrument will automatically adjust the optimal signal level during the test. The instrument will automatically calculate the rate deviation, amplitude, be-at error, and display them by the data in real time; select "±99.9s/d" at item rate ranges for result display, which can make the accuracy of rate deviation up to 0.1s/d. For the conventional be-at, the instrument can automatically respond; for the special be-at, can manually select. The sampling period can be selected by 2 seconds, 4 seconds, 6 seconds, 8 seconds, 12 seconds, 20 seconds, 30 seconds, 60 seconds, and the average value of corresponding period will be regarded as the precise value of the watch. Six kinds of testing positions can be adjusted, and the simulation sound can be played in the speaker or mute. Measuring possibilities: rate deviation, amplitude, be-at error of mechanical watches and diagram recording of the be-at noise. Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Rate deviation measurement: Measuring ranges: ±999s/d or ±99.9s/d Resolution: 1.0s/d or 0.1s/d Amplitude measurement: Measuring ranges: 100°~360° Resolution: 1° Measuring of the be-at error: Measuring ranges: 0.0~9.9 ms Resolution: 0.1 milliseconds Lift angle: Measuring ranges: 30°~70° Default value: 52° Measure positions: 1-6 positions Line length: 480 points Measuring times periods: 2/4/6/8/12/20/30/60 seconds Display: color LCD graphic monitor, 480*272 pixels Working environment: 10℃~40℃ Relative humidity: 0~80% RH Plug Type :EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Voltage: AC100-240V Colour:Black Material:plastic+metal Package Contents: 1 x Timing Timegrapher Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. NO.1000 Mechanical Watch Calibrator is a high precise instrument specially designed for testing and calibrating mechanical watches. It can measure various performance parameters of mechanical watches, such as rate deviation, amplitude, beat frequency error and so on. Through the measurement and analysis of these parameters, it can accurately judge the performance and status of the mechanical watch, so as to carry out precise adjustment and calibration to ensure the accuracy and stability of the mechanical watch. Features: This mechanical watch tester is a highly accurate test instrument that allows watch manufacturers and watchrepair technicians to easily test mechanical watches. It adopts PC flame-retardant housing with high flame-retardant properties, stability, and wear resistance, with long durability. The 98*34mm LCD screen has a resolution of 192*64 pixels, and the data lines are clearly visible. The entire frequency diagram of the watch can be displayed on the LCD screen. During testing, the instrument automatically adjusts the optimal signal strength for different watches. It can automatically calculate the values of deviation, amplitude, and beat error, and display the data in real-time. The instrument can automatically detect watches with regular beat and can manually select watches with special beat. 2s, 4s, 6s, 8s, 10s, 20s, 30s, 60s test periods can be selected and the average value of the watch time of the selected period can be calculated. Adjustable for 6 test orientations, with or without analogue sound can be set during the test. Specifications: Plug: USA-plug Main material: metal Color: black Measuring possibilities: rate deviation, amplitude, be-at error Rate deviation measurement: the ranges of deviation is ±999 sec/day, accuracy is 1.0 sec/day Amplitude measurement: numerical display in degrees, resolution is 1°, measuring ranges is 100° to 360° Measuring for the be-at error (frequency error): numerical display in milliseconds. Resolution is 0.1 milliseconds; the measuring ranges is 0-9.9 ms Measuring position: 1 to 6 positions Sampling periods: 2/4/6/8/12/20/30/60s Lift angle: 30° to 70°, default is 52° Line length: 196 points Language: Chinese, English, Japanese Display dimensions: 98 * 34mm / 3.9 * 1.3in Item size: 172 * 114 * 40mm / 6.8 * 4.5 * 1.6in Item weight: 1400g / 3.1lb Package size: 200 * 150 * 80mm / 7.9 * 5.9 * 3.1in Package weight: 1483g / 3.3lb Packing List: 1 * Timegrapher 1 * Microphone 1 * Power Cable 1 * User Manual

Price: 165.99 USD

Location: Hainesport, New Jersey

End Time: 2025-01-05T01:21:01.000Z

Shipping Cost: 0 USD